求the key to home 游戏e
点击联系发帖人
时间：2018-05-25 06:53
Keyboard - lesson one
Keyboard exercises 1-10:
Choose an Exercise
Exercise 1
Exercise 2
Exercise 3
Exercise 4
Exercise 5
Exercise 6
Exercise 7
Exercise 8
Exercise 9
Exercise 10
The home row of the keyboard is the most important to the
touch-typist.When at rest the typist's fingers are positioned,
lightly, on the A-S-D-F keys for the
left hand, and the J-K-L-; keys
for the right hand.
The left index finger will control the
F and G keys, the right index
finger will control the J and H
The left middle finger will control the
D key, the right middle
finger will control the K key.
The left ring finger will control the
S key, the right ring
finger will control the L key.
The left little finger will control the
A key, the right little
finger will control the ; key.
The spacebar is controlled by the
right thumb.
The home row.
LEFT HANDRIGHT HAND
LFRFMFIFIFIFIFMFRFLF
LF = little finger,
RF = ring finger,
MF = middle finger,
IF = index finger
The F and J keys often
have small raised bumps on their tops, a
tactile aid for the typist.
The locations of all the other keys on the keyboard are learned
in relation to these home keys so the touch-typist must be able
to find the home keys by touch.
Using the raised
bumps on the F and J
keys as a guide, see if you can put your fingers on
the home row correctly, without looking at the keyboard. No
Make sure you are sitting up straight, your feet flat on the floor. Keep your elbows close to your body, your wrists straight and your forearms level, and remember - .
When you are ready to begin, select an exercise and strike the key requested. Try not to look at the
keyboard. It will be difficult at first but as the exercise
progresses you will find it becomes easier and your fingers will
begin to move without you consciously deciding which finger is
associated with which key.
You may find it helpful to quietly say the name of
the key as you strike it.Don't let your mistakes cause you to
lose heart, touch typing is a skill that can be learned by
Repeat each exercise at least three times.家的钥匙游戏_TheKeytoHome中文硬盘版_飞翔游戏
单机游戏下载单机游戏下载基地
当前位置： →
→ 家的钥匙(The Key to Home) 中文版
家的钥匙(The Key to Home) 中文版
游戏语言：中文
游戏大小：0KB
更新时间：
发行时间：2017年
游戏类型：普通
游戏标签：
家的钥匙TheKeytoHome是一款非常有趣而且有爱的悬疑向推理文字类游戏，游戏中的故事发生在一所小学。主要讲述了他们的一位老师拥有恋童癖，而几次的偷拍行为都被班上的女童给抓住了把柄，从而开始加入隐藏在学校中神秘集团探索的推理过程。整体的画风以及内容
暂无相关下载，敬请期待！
家的钥匙(The Key to Home)是一款非常有趣而且有爱的悬疑向推理文字类游戏，游戏中的故事发生在一所小学。主要讲述了他们的一位老师拥有恋童癖，而几次的偷拍行为都被班上的女童给抓住了把柄，从而开始加入隐藏在学校中神秘集团探索的推理过程。整体的画风以及内容都颇具欢乐以及正能量，带给你不少的青春回忆！游戏介绍这是一款以校园为主题的萝莉风剧情文字游戏，虽然是一款galgame，有些部分比较敏感，但他们对这些行为是坚决反对的，游戏中也对此进行了批判，而且自始至终没有任何直接的性描写。相反，这个游戏的主线讲的是几位小学生发现学校黑幕后，联合老师，最终用智慧摧毁犯罪集团的正能量故事。另外游戏中的故事情节中保留了对违法犯罪行为的批判，没有过于越界的镜头，整体的剧情风格还算是清新有爱。游戏特色1、以剧情为主的清新校园故事2、多个不同的幼女角色3、大量的文本内容4、丰富的支线剧情以及多结局探索5、全程人物配音人物介绍佐久间 梨香小学四年级的女童。虽然智能很高但是性格最差，把大人玩弄在掌心的小恶魔娘。利用呆弱教师黑柳的弱点，将他卷进自己的计划中。Position：小学四年级生Age：9Symbol：红心Voice：纱友黑柳 博士被同僚及都多少看不起的呆弱。是重度的罗丽控，在学校的厕所内设置偷拍摄影机的犯罪者。虽然被女主角的幼女设陷利用，但连那都似乎感到高兴的无可救药的变态。Position：小学校师Age：25Symbol：鬼牌风见 纪子正义感强的认真孩子。为了守护学校的秩序，严格取缔违反校规的人。最近的兴趣是在好坏事记录簿上纪录问题儿童（主要是晶）的问题行动。Position：小学四年级生。班上的风纪委员＆风纪委员长Age：9Symbol：黑桃Voice：远藤 茉爱狮童 晶身上穿着辣妹系服饰的活泼的少女。常常跷课且上课中常在玩扑克牌游戏。到处搜寻金钱的气息，很麻烦。Position：小学四年级生Age：10Symbol：方块Voice：犬饲 あお橘 美沙总是呆呆的。平时都笑嘻嘻的。对于状况不太能理解。可爱的穿着西装式制服。Position：中学1年级生Age：12Symbol：梅花Voice：小山 ハル神宫寺在太太之间很有人气的年轻爽朗的校长。其实对于权力很有野望，最终目的是要当市长而正在出马竞选准备中的野心家。Position：小学校长Age：32Symbol：国王配置要求操作系统:&Windows 7 or later处理器:&Dual core CPU @2GHz (Pentium D or better)内存:&4 GB RAM图形:&Intel HD 4000, GeForce 8800, ATI 1950 or betterDirectX 版本:&11网络:&宽带互联网连接存储空间:&需要 5 GB 可用空间安装方法1、下载压缩包解压2、直接进入游戏视频欣赏
327.2M / 05-10
RPG角色扮演
261.1M / 05-10
RPG角色扮演
183.5M / 05-10
RPG角色扮演
本类游戏下载排行
RTS即时战略 / 939.6M
SLG休闲益智 / 211.2M
STG射击游戏 / 132.8M
SLG休闲益智 / 156M
STG射击游戏 / 61.9M
AVG冒险游戏 / 41.8M
STG射击游戏 / 615M
STG射击游戏 / 2.03G
RPG角色扮演 / 0KB
RPG角色扮演 / 0KB当前位置：→→→家门钥匙
游戏类型：
游戏语言：简体中文
游戏大小：500MB
游戏制作： Katsudou Mangaya
游戏发行： Henteko Doujin
上市时间：
操作系统：Win7, Win8, Win10
更新时间：
《家门钥匙（The Key to Home ）》是一款剧情向的冒险类游戏，该作的画风十分的温馨可人，而人物立绘也是栩栩如生，玩家们将会在唯美的环境下经历一段精彩的剧情故事，而游戏的整体氛围十分的悬疑，大家在这里将会感受到谎言，欺骗，背叛，学生会与老师相互斗争，至于丰富性的游戏内容绝对不会令各位失望！所以有兴趣的朋友们切莫错过了！
黑柳博士，是一个经历过失败人生的小学老师，现如今他被一个恶魔般聪明伶俐的女孩佐久间梨香给胁迫了，要去抢劫学校内一笔价值数千万日元的隐藏财富。
谎言，欺骗，背叛&在这部悬疑视觉小说内，老师和学生互相斗争，争夺统治地位。
而谁又会站出来宣称学校内的这些隐藏的财富?
这是一部悬疑视觉小说，适合所有喜欢小女孩的绅士和淑女们游玩！
佐久间梨香
一个四年级的女孩，尽管她有反社会的倾向，却很聪明。她用她顽皮的技巧使成年人适应她的幻想。在发现了Hiroshi的黑暗秘密后，她用它来对付他，招募他进入一个抢劫计划。
工作:四年级小学生
声优:紗友(Sayu)
一个不称职的老师，被同事和学生都看不起。他有一个严重的洛丽塔情结，甚至在学校的洗手间里设置了隐蔽的摄像头。他已经完全陷入了女主角的陷阱，但他是一个病态的怪人，他真的很享受这个过程。
工作:四年级的老师
一个在学校里维护正义和秩序的荣誉学生。她喜欢在自己的笔记本上记录问题儿童(主要是Akira)。
工作:4年级，霍尔班长，班级代表。
声优:遠藤 茉愛(Mame Endou)
一个狂野而有活力的女孩，公然蔑视学校的着装规范。作为核心的麻烦制造者，她总是在寻找一个快速的巴克，并且倾向于逃课和打牌。
工作:4年级
声优:犬飼 あお(Ao Inukai)
剧中的学习
一个心不在焉的女孩，她总是面带微笑，即使她不明白她周围发生了什么。她喜欢穿她可爱又时髦的校服。
工作:初一初中生
象征:三叶草
声音:小山ハル(Haru小山)
一个年轻的小学校长，因为他的干净形象而受到父母的欢迎。然而，事实是，他是一个贪婪、渴望权力的骗子，他正准备宣布竞选市长。
工作:小学校长
迅雷提示“任务出错”，请查看，下载前查看游戏说明和网友评论，游戏问题可以参考在线学习。
游戏可能被某些杀毒软件提示，部分报毒与破解汉化有关，请谨慎下载。如下载失效，请至举报。
本站仅创建用户沟通交流的信息平台，所展示的游戏/软件内容来均来自于第三方用户上传分享，资源仅作为用户间分享讨论之用，除开发商授权外不以盈利为目的。如果侵犯了您的权益，请，我们将第一时间处理。
大家都在玩
解谜冒险游戏推荐
最新游戏推荐
热门游戏推荐I (冲) into my home to get the key to my classroom. 题目和参考答案——精英家教网——
暑假天气热？在家里学北京名师课程，
& 题目详情
(冲) into my home to get the key to my classroom.
& 3. rushed
题目来源： &
练习册系列答案
科目：初中英语
7. The Blacks
(have) their Christmas dinner at present.
科目：初中英语
() 11. What does today's newspaper
about the hot weather these days?&&&A. speak&&&B. talk&&&C. tell D. say
科目：初中英语
9. The Greens
(have) a picnic if it is fine this Sunday morning.
科目：初中英语
& & Harry didn't stop his car at the traffic lights when they were red,and he hit another car. Harry jumped out and went to it. There was an old man in the car. He was afraid and shouted to Harry ,“What are you doing? You nearly killed (差点杀死) me!”& &“Yes ,” Harry answered, “I'm sorry." He took a bottle out of his car and said ,“Drink some of this,then you’ll feel better." He gave the man some wine (酒) ，and the man drank it,but he shouted again ,“You nearly killed me."& &Harry gave him the bottle again,and the man drank a lot of the wine. Then he smiled and said to Harry ,“Thank you,I feel much better now. But why aren’t you drinking?”Oh,well,,Harry answered, I don't want any wine now. I'm going to sit here and wait for the police."() 6. Harry hit another car because
&.&&&A. he broke the traffic rules & &B.he drank too much wine at home&&&C. he wanted to kill the man&&&D. he wanted to drive the man's car() 7. After he hit the car,Harry .&&&A. was very happy&&&B. didn't think he was wrong&&&C. was very busy&&&D. was juiet and had an idea() 8. At first the old man was
.&&&A. glad for Harry&&&B. angry with Harry&&&C. really dying&&&D. wounded (受伤)() 9. Harry gave the old man a bottle of wine to & &.&&&A. make the old man sad&&&B. make fhc old man drive his car&&&C. fool (愚弄) the old man I) , make the old man stop driving() 10. Which of the following sentences is true?&&&A. The old man didn't like to drink wine.&&&B. The old man wanted to go to the police station.&&&C. Harry was very angry with the old man.&&&D. Harry was not afraid to see the police at last.
科目：初中英语
8. What did you learn today?—The teacher told us to give
to the old people on the bus.
科目：初中英语
() 5. The bag is full. You
put anything else in it now.&&&A. could&&&B. didn't&&&C. need&&&D. can't
科目：初中英语
2. He is a clever boy.(改为感叹句) the boy is!
科目：初中英语
() 1. great fun the students are having playing football now!&&&A. How&&&B. What&&&C. What a&&&D. How a
精英家教网新版app上线啦！用app只需扫描书本条形码就能找到作业，家长给孩子检查作业更省心，同学们作业对答案更方便，扫描上方二维码立刻安装！
请输入姓名
请输入手机号C语言 c++ php mysql nginx linux lnmp lamp lanmp memcache redis 面试 笔记 ppt 设计模式 问题 远程连接 草榴 草榴社区 caoliu
Nginx需要依赖下面3个包
1. gzip 模块需要 zlib 库 ( 下载: http://www.zlib.net/ ) &zlib-1.2.8.tar.gz
2. rewrite 模块需要 pcre 库 ( 下载: http://www.pcre.org/ ) &pcre-8.21.tar.gz
3. ssl 功能需要 openssl 库 ( 下载: http://www.openssl.org/ ) &openssl-1.0.1.tar.gz
注意：如果用源码安装的话，后面nginx安装的时候需要指定&--with-pcre 对应的压缩包路径，如果用二进制包安装则不需指定
依赖包一键安装：&yum -y install zlib zlib-devel openssl openssl--devel pcre pcre-devel
yum -y groupinstall "Development Tools" "Development Libraries" 此命令可以一键安装开发工具包
安装命令：
tar -xzvf openssl-1.0.1.tar.gz
cd openssl-1.0.1
./config(注意) && make && make install
tar -xzvf pcre-8.21.tar.gz
cd pcre-8.21
./configure
&& make && make install
tar -xzvf zlib-1.2.8.tar.gz
cd zlib-1.2.8
./configure
&& make && make install
nginx安装命令： nginx各个版本下载地址：http://nginx.org/download/
groupadd -r nginx
useradd -r -g nginx -s /bin/false -M nginx
#注意 \ 前面至少一个有空格
./configure --sbin-path=/usr/local/nginx/nginx \
--conf-path=/usr/local/nginx/nginx.conf \
--pid-path=/usr/local/nginx/nginx.pid \
--with-http_ssl_module \
--with-pcre=../pcre-8.21 \
#指向解压的源码目录
--with-zlib=../zlib-1.2.8 \
#指向解压的源码目录
--with-openssl=../openssl-1.0.1 \ #指向解压的源码目录
--with-http_stub_status_module \#启用 nginx 的 NginxStatus 功能，用来监控 Nginx 的当前状态
--user=nginx \
--group=nginx
&注：编译好的nginx可以通过&/usr/local/nginx/nginx&-V &（具体路径以安装的为主） 查看编译时候的参数
/usr/local/nginx/nginx #不指定配置文件地址 /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf #指定配置文件地址
sudo kill `cat /usr/local/nginx/nginx.pid`
服务控制脚本（todo）
浏览器中输入localhost如果可以看到欢迎界面则安装成功
虚拟主机配置
只需更改 server_name 为对应的网站域名即可
检测配置文件
/usr/local/nginx/nginx -t
重新加载配置文件(不停止服务)
/usr/local/nginx/nginx -s reload
打开目录浏览功能
location / {
#打开目录列表
autoindex_exact_ #on显示文件的确切大小，off则会用M、G等单位
autoindex_ #显示文件服务器时间，off显示GMT时间
index.html index.
Nginx编译参数解析
&prefix #nginx安装目录，默认在/usr/local/nginx
&pid-path #pid问件位置，默认在logs目录
&lock-path #lock问件位置，默认在logs目录
&with-http_ssl_module #开启HTTP SSL模块，以支持HTTPS请求。
&with-http_dav_module #开启WebDAV扩展动作模块，可为文件和目录指定权限
&with-http_flv_module #支持对FLV文件的拖动播放
&with-http_realip_module #支持显示真实来源IP地址
&with-http_gzip_static_module #预压缩文件传前检查，防止文件被重复压缩
&with-http_stub_status_module #取得一些nginx的运行状态
&with-mail #允许POP3/IMAP4/SMTP代理模块
&with-mail_ssl_module #允许POP3／IMAP／SMTP可以使用SSL／TLS
&with-pcre=../pcre-8.11 #注意是未安装的pcre路径
&with-zlib=../zlib-1.2.5 #注意是未安装的zlib路径
&with-debug #允许调试日志
&http-client-body-temp-path #客户端请求临时文件路径
&http-proxy-temp-path #设置http proxy临时文件路径
&http-fastcgi-temp-path #设置http fastcgi临时文件路径
&http-uwsgi-temp-path=/var/tmp/nginx/uwsgi #设置uwsgi 临时文件路径
&http-scgi-temp-path=/var/tmp/nginx/scgi #设置scgi 临时文件路径
pcre安装日志
pcre-8.21 configuration summary:
Install prefix .................. : /usr/local
C preprocessor .................. : gcc -E
C compiler ...................... : gcc
C++ preprocessor ................ : g++ -E
C++ compiler .................... : g++
Linker .......................... : /usr/bin/ld
C preprocessor flags ............ :
C compiler flags ................ : -O2
C++ compiler flags .............. : -O2
Linker flags .................... :
Extra libraries ................. :
Build C++ library ............... : yes
Enable JIT compiling support .... : no
Enable UTF-8 support ............ : no
Unicode properties .............. : no
Newline char/sequence ........... : lf
\R matches only ANYCRLF ......... : no
EBCDIC coding ................... : no
Rebuild char tables ............. : no
Use stack recursion ............. : yes
POSIX mem threshold ............. : 10
Internal link size .............. : 2
Match limit ..................... :
Match limit recursion ........... : MATCH_LIMIT
Build shared libs ............... : yes
Build static libs ............... : yes
Use JIT in pcregrep ............. : no
Buffer size for pcregrep ........ : 20480
Link pcregrep with libz ......... : no
Link pcregrep with libbz2 ....... : no
Link pcretest with libreadline .. : no
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
make[1]: Entering directory `/root/software/pcre-8.21'
test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib"
/bin/sh ./libtool
--mode=install /usr/bin/install -c
libpcre.la libpcreposix.la libpcrecpp.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libpcre.so.0.0.1 /usr/local/lib/libpcre.so.0.0.1
libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so.0 || { rm -f libpcre.so.0 && ln -s libpcre.so.0.0.1 libpcre.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.0.0.1 libpcre. }; })
libtool: install: /usr/bin/install -c .libs/libpcre.lai /usr/local/lib/libpcre.la
libtool: install: warning: relinking `libpcreposix.la'
libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool
--tag CC --mode=relink gcc -O2 -version-info 0:0:0 -o libpcreposix.la -rpath /usr/local/lib pcreposix.lo libpcre.la )
libtool: relink: gcc -shared
-fPIC -DPIC
.libs/pcreposix.o
-Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre
-Wl,-soname -Wl,libpcreposix.so.0 -o .libs/libpcreposix.so.0.0.0
libtool: install: /usr/bin/install -c .libs/libpcreposix.so.0.0.0T /usr/local/lib/libpcreposix.so.0.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.0 libpcreposix.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.0 libpcreposix. }; })
libtool: install: /usr/bin/install -c .libs/libpcreposix.lai /usr/local/lib/libpcreposix.la
libtool: install: warning: relinking `libpcrecpp.la'
libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool
--tag CXX --mode=relink g++ -O2 -version-info 0:0:0 -o libpcrecpp.la -rpath /usr/local/lib pcrecpp.lo pcre_scanner.lo pcre_stringpiece.lo libpcre.la )
libtool: relink: g++
-fPIC -DPIC -shared -nostdlib /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crti.o /usr/lib/gcc/i686-redhat-linux/4.4.4/crtbeginS.o
.libs/pcrecpp.o .libs/pcre_scanner.o .libs/pcre_stringpiece.o
-Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre -L/usr/lib/gcc/i686-redhat-linux/4.4.4 -L/usr/lib/gcc/i686-redhat-linux/4.4.4/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i686-redhat-linux/4.4.4/crtendS.o /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crtn.o
-Wl,-soname -Wl,libpcrecpp.so.0 -o .libs/libpcrecpp.so.0.0.0
libtool: install: /usr/bin/install -c .libs/libpcrecpp.so.0.0.0T /usr/local/lib/libpcrecpp.so.0.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.0 libpcrecpp. }; })
libtool: install: /usr/bin/install -c .libs/libpcrecpp.lai /usr/local/lib/libpcrecpp.la
libtool: install: /usr/bin/install -c .libs/libpcre.a /usr/local/lib/libpcre.a
libtool: install: chmod 644 /usr/local/lib/libpcre.a
libtool: install: ranlib /usr/local/lib/libpcre.a
libtool: install: /usr/bin/install -c .libs/libpcreposix.a /usr/local/lib/libpcreposix.a
libtool: install: chmod 644 /usr/local/lib/libpcreposix.a
libtool: install: ranlib /usr/local/lib/libpcreposix.a
libtool: install: /usr/bin/install -c .libs/libpcrecpp.a /usr/local/lib/libpcrecpp.a
libtool: install: chmod 644 /usr/local/lib/libpcrecpp.a
libtool: install: ranlib /usr/local/lib/libpcrecpp.a
libtool: finish: PATH="/usr/lib/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/mysql/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
openssl安装日志
[root@localhost openssl-fips-2.0.2]# make install
if [ -n "libcrypto" ]; then \
EXCL_OBJ='aes-586.o aesni-x86.o bn-586.o co-586.o x86-mont.o x86-gf2m.o des-586.o crypt586.o x86cpuid.o sha1-586.o sha256-586.o sha512-586.o ghash-x86.o ../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' ; export EXCL_OBJ ; \
ARX='/usr/bin/perl ${TOP}/util/arx.pl ar
fi ; export ARX ; \
if [ y = "y" ]; then \
AS='/usr/bin/perl ${TOP}/util/fipsas.pl ${TOP} ${&} gcc' ; \
AS='gcc -c' ; \
fi ; export AS ; \
dir= target= if expr " crypto fips test
" : ".* $dir " &/dev/null 2&&1; then if [ -d "$dir" ]; then (
cd $dir && echo "making $target in $dir..." && TOP= && unset TOP ${LIB+LIB} ${LIBS+LIBS} ${INCLUDE+INCLUDE} ${INCLUDES+INCLUDES} ${DIR+DIR} ${DIRS+DIRS} ${SRC+SRC} ${LIBSRC+LIBSRC} ${LIBOBJ+LIBOBJ} ${ALL+ALL} ${EXHEADER+EXHEADER} ${HEADER+HEADER} ${GENERAL+GENERAL} ${CFLAGS+CFLAGS} ${ASFLAGS+ASFLAGS} ${AFLAGS+AFLAGS} ${LDCMD+LDCMD} ${LDFLAGS+LDFLAGS} ${SHAREDCMD+SHAREDCMD} ${SHAREDFLAGS+SHAREDFLAGS} ${SHARED_LIB+SHARED_LIB} ${LIBEXTRAS+LIBEXTRAS} && make -e PLATFORM='linux-elf' PROCESSOR='' CC='gcc' CFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM' ASFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c' AR='ar
r' NM='nm' RANLIB='/usr/bin/ranlib' CROSS_COMPILE='' PERL='/usr/bin/perl' ENGDIRS='ccgost' SDIRS='sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac' LIBRPATH='/usr/local/ssl/fips-2.0/lib' INSTALL_PREFIX='' INSTALLTOP='/usr/local/ssl/fips-2.0' OPENSSLDIR='/usr/local/ssl/fips-2.0' LIBDIR='lib' MAKEDEPEND='$${TOP}/util/domd $${TOP} -MD gcc' DEPFLAG='-DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_BF -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAST -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_IDEA -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_MD5 -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC2 -DOPENSSL_NO_RC4 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_RIPEMD -DOPENSSL_NO_SEED -DOPENSSL_NO_SRP -DOPENSSL_NO_SSL2 -DOPENSSL_NO_SSL3 -DOPENSSL_NO_STORE -DOPENSSL_NO_TLS1 -DOPENSSL_NO_TLSEXT' MAKEDEPPROG='gcc' SHARED_LDFLAGS='' KRB5_INCLUDES='' LIBKRB5='' ZLIB_INCLUDE='' LIBZLIB='' EXE_EXT='' SHARED_LIBS='libcrypto.so.1.1.0 libssl.so.1.1.0' SHLIB_EXT='.so.1.1.0' SHLIB_TARGET='linux-shared' PEX_LIBS='' EX_LIBS='-ldl' CPUID_OBJ='x86cpuid.o' BN_ASM='bn-586.o co-586.o x86-mont.o x86-gf2m.o' DES_ENC='des-586.o crypt586.o' AES_ENC='aes-586.o aesni-x86.o' CMLL_ENC='cmll-x86.o' BF_ENC='bf-586.o' CAST_ENC='c_enc.o' RC4_ENC='rc4-586.o' RC5_ENC='rc5-586.o' SHA1_ASM_OBJ='sha1-586.o sha256-586.o sha512-586.o' MD5_ASM_OBJ='md5-586.o' RMD160_ASM_OBJ='rmd-586.o' WP_ASM_OBJ='wp_block.o wp-mmx.o' MODES_ASM_OBJ='ghash-x86.o' PERLASM_SCHEME='elf' FIPSLIBDIR='' FIPSCANLIB="${FIPSCANLIB:-libcrypto}" FIPSCANISTERINTERNAL='y' FIPSCANISTERONLY='y' FIPS_EX_OBJ='../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' THIS=${THIS:-build_crypto} MAKEFILE=Makefile MAKEOVERRIDES= TOP=.. DIR=$dir $target ) || exit 1; fi; fi
making fips in crypto...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto'
[ -n "sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac" ] && for i in sha hmac des aes modes bn ec rsa dsa ecdsa dh b do \
( obj=`/usr/bin/perl ../util/fipsobj.pl $i` && \
cd $i && echo "making fips in crypto/$i..." && \
make -e TOP=../.. DIR=$i INCLUDES='-I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include ' $obj ) || exit 1; \
making fips in crypto/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha'
make[2]: &sha1dgst.o&是最新的。
make[2]: &sha256.o&是最新的。
make[2]: &sha512.o&是最新的。
make[2]: &sha1-586.o&是最新的。
make[2]: &sha256-586.o&是最新的。
make[2]: &sha512-586.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha'
making fips in crypto/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
make[2]: &hmac.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
making fips in crypto/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des'
make[2]: &cfb64ede.o&是最新的。
make[2]: &cfb64enc.o&是最新的。
make[2]: &cfb_enc.o&是最新的。
make[2]: &ecb3_enc.o&是最新的。
make[2]: &ofb64ede.o&是最新的。
make[2]: &fcrypt.o&是最新的。
make[2]: &set_key.o&是最新的。
make[2]: &des-586.o&是最新的。
make[2]: &crypt586.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des'
making fips in crypto/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes'
make[2]: &aes_cfb.o&是最新的。
make[2]: &aes_ecb.o&是最新的。
make[2]: &aes_ofb.o&是最新的。
make[2]: &aes-586.o&是最新的。
make[2]: &aesni-x86.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes'
making fips in crypto/modes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes'
make[2]: &cbc128.o&是最新的。
make[2]: &ccm128.o&是最新的。
make[2]: &cfb128.o&是最新的。
make[2]: &ctr128.o&是最新的。
make[2]: &gcm128.o&是最新的。
make[2]: &ofb128.o&是最新的。
make[2]: &xts128.o&是最新的。
make[2]: &ghash-x86.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes'
making fips in crypto/bn...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn'
make[2]: &bn_add.o&是最新的。
make[2]: &bn_blind.o&是最新的。
make[2]: &bn_ctx.o&是最新的。
make[2]: &bn_div.o&是最新的。
make[2]: &bn_exp2.o&是最新的。
make[2]: &bn_exp.o&是最新的。
make[2]: &bn_gcd.o&是最新的。
make[2]: &bn_gf2m.o&是最新的。
make[2]: &bn_lib.o&是最新的。
make[2]: &bn_mod.o&是最新的。
make[2]: &bn_mont.o&是最新的。
make[2]: &bn_mul.o&是最新的。
make[2]: &bn_nist.o&是最新的。
make[2]: &bn_prime.o&是最新的。
make[2]: &bn_rand.o&是最新的。
make[2]: &bn_recp.o&是最新的。
make[2]: &bn_shift.o&是最新的。
make[2]: &bn_sqr.o&是最新的。
make[2]: &bn_word.o&是最新的。
make[2]: &bn_x931p.o&是最新的。
make[2]: &bn-586.o&是最新的。
make[2]: &co-586.o&是最新的。
make[2]: &x86-mont.o&是最新的。
make[2]: &x86-gf2m.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn'
making fips in crypto/ec...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec'
make[2]: &ec_curve.o&是最新的。
make[2]: &ec_cvt.o&是最新的。
make[2]: &ec_key.o&是最新的。
make[2]: &ec_lib.o&是最新的。
make[2]: &ecp_mont.o&是最新的。
make[2]: &ec_mult.o&是最新的。
make[2]: &ecp_nist.o&是最新的。
make[2]: &ecp_smpl.o&是最新的。
make[2]: &ec2_mult.o&是最新的。
make[2]: &ec2_smpl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec'
making fips in crypto/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
make[2]: &rsa_eay.o&是最新的。
make[2]: &rsa_gen.o&是最新的。
make[2]: &rsa_crpt.o&是最新的。
make[2]: &rsa_none.o&是最新的。
make[2]: &rsa_oaep.o&是最新的。
make[2]: &rsa_pk1.o&是最新的。
make[2]: &rsa_pss.o&是最新的。
make[2]: &rsa_ssl.o&是最新的。
make[2]: &rsa_x931.o&是最新的。
make[2]: &rsa_x931g.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
making fips in crypto/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
make[2]: &dsa_gen.o&是最新的。
make[2]: &dsa_key.o&是最新的。
make[2]: &dsa_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
making fips in crypto/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
make[2]: &ecs_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
making fips in crypto/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh'
make[2]: &dh_check.o&是最新的。
make[2]: &dh_gen.o&是最新的。
make[2]: &dh_key.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh'
making fips in crypto/buffer...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
make[2]: &buf_str.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
making fips in crypto/evp...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp'
make[2]: &e_aes.o&是最新的。
make[2]: &e_des3.o&是最新的。
make[2]: &e_null.o&是最新的。
make[2]: &m_sha1.o&是最新的。
make[2]: &m_dss1.o&是最新的。
make[2]: &m_dss.o&是最新的。
make[2]: &m_ecdsa.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp'
making fips in crypto/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
make[2]: &ech_key.o&是最新的。
make[2]: &ech_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
making fips in crypto/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[2]: &cmac.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto'
making all in fips...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
making all in fips/sha...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha'
making all in fips/rand...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand'
making all in fips/des...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des'
making all in fips/aes...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes'
making all in fips/dsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa'
making all in fips/ecdh...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
making all in fips/ecdsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
making all in fips/rsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa'
making all in fips/dh...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh'
making all in fips/cmac...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac'
making all in fips/hmac...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac'
making all in fips/utl...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[2]: &lib&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
created directory `/usr/local/ssl'
created directory `/usr/local/ssl/fips-2.0'
created directory `/usr/local/ssl/fips-2.0/bin'
created directory `/usr/local/ssl/fips-2.0/lib'
created directory `/usr/local/ssl/fips-2.0/include'
created directory `/usr/local/ssl/fips-2.0/include/openssl'
making install in crypto...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto'
making install in crypto/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha'
making install in crypto/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
making install in crypto/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des'
making install in crypto/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes'
making install in crypto/modes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes'
making install in crypto/bn...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn'
making install in crypto/ec...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec'
making install in crypto/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
making install in crypto/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
making install in crypto/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
making install in crypto/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh'
making install in crypto/buffer...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
making install in crypto/evp...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp'
making install in crypto/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
making install in crypto/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto'
making install in fips...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
making install in fips/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha'
making install in fips/rand...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand'
making install in fips/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des'
making install in fips/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes'
making install in fips/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa'
making install in fips/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
making install in fips/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
making install in fips/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa'
making install in fips/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh'
making install in fips/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac'
making install in fips/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac'
making install in fips/utl...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl'
for i in fipsld fips_standalone_sha1 ; \
echo "installing $i"; \
cp $i /usr/local/ssl/fips-2.0/bin/$i. \
chmod 755 /usr/local/ssl/fips-2.0/bin/$i. \
mv -f /usr/local/ssl/fips-2.0/bin/$i.new /usr/local/ssl/fips-2.0/bin/$i; \
installing fipsld
installing fips_standalone_sha1
cp -p -f fipscanister.o fipscanister.o.sha1 \
fips_premain.c fips_premain.c.sha1 \
/usr/local/ssl/fips-2.0/lib/; \
chmod 0444 /usr/local/ssl/fips-2.0/lib/fips*
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
making install in test...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/test'
make[1]: Nothing to be done for `install'.
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/test'
zlib安装日志
cp libz.a /usr/local/lib
chmod 644 /usr/local/lib/libz.a
cp libz.so.1.2.8 /usr/local/lib
chmod 755 /usr/local/lib/libz.so.1.2.8
cp zlib.3 /usr/local/share/man/man3
chmod 644 /usr/local/share/man/man3/zlib.3
cp zlib.pc /usr/local/lib/pkgconfig
chmod 644 /usr/local/lib/pkgconfig/zlib.pc
cp zlib.h zconf.h /usr/local/include
chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h
nginx安装日志
Configuration summary
+ using PCRE library: ../pcre-8.21
+ using OpenSSL library: ../openssl-fips-2.0.2
+ md5: using OpenSSL library
+ sha1: using OpenSSL library
+ using zlib library: ../zlib-1.2.8
nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/nginx"
nginx configuration prefix: "/usr/local/nginx"
nginx configuration file: "/usr/local/nginx/nginx.conf"
nginx pid file: "/usr/local/nginx/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp"
_________________________________________________________________
[root@localhost nginx-1.4.5]# make install
make -f objs/Makefile install
make[1]: Entering directory `/root/software/nginx-1.4.5'
test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
test ! -f '/usr/local/nginx/nginx'
|| mv '/usr/local/nginx/nginx'
'/usr/local/nginx/nginx.old'
cp objs/nginx '/usr/local/nginx/nginx'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
cp conf/koi-win '/usr/local/nginx'
cp conf/koi-utf '/usr/local/nginx'
cp conf/win-utf '/usr/local/nginx'
test -f '/usr/local/nginx/mime.types'
|| cp conf/mime.types '/usr/local/nginx'
cp conf/mime.types '/usr/local/nginx/mime.types.default'
test -f '/usr/local/nginx/fastcgi_params'
|| cp conf/fastcgi_params '/usr/local/nginx'
cp conf/fastcgi_params
'/usr/local/nginx/fastcgi_params.default'
test -f '/usr/local/nginx/fastcgi.conf'
|| cp conf/fastcgi.conf '/usr/local/nginx'
cp conf/fastcgi.conf '/usr/local/nginx/fastcgi.conf.default'
test -f '/usr/local/nginx/uwsgi_params'
|| cp conf/uwsgi_params '/usr/local/nginx'
cp conf/uwsgi_params
'/usr/local/nginx/uwsgi_params.default'
test -f '/usr/local/nginx/scgi_params'
|| cp conf/scgi_params '/usr/local/nginx'
cp conf/scgi_params
'/usr/local/nginx/scgi_params.default'
test -f '/usr/local/nginx/nginx.conf'
|| cp conf/nginx.conf '/usr/local/nginx/nginx.conf'
cp conf/nginx.conf '/usr/local/nginx/nginx.conf.default'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
test -d '/usr/local/nginx/logs' ||
mkdir -p '/usr/local/nginx/logs'
test -d '/usr/local/nginx/html'
|| cp -R html '/usr/local/nginx'
test -d '/usr/local/nginx/logs' ||
mkdir -p '/usr/local/nginx/logs'
make[1]: Leaving directory `/root/software/nginx-1.4.5'
参考地址：http://www.xj123.info/2416.html
&http://www.cnblogs.com/dennisit/archive//2834719.html
&http://blog.s135.com/nginx_php_v6/
http://www.nginx.cn/install
阅读(...) 评论()}
Keyboard exercises 1-10:
Choose an Exercise
Exercise 1
Exercise 2
Exercise 3
Exercise 4
Exercise 5
Exercise 6
Exercise 7
Exercise 8
Exercise 9
Exercise 10
The home row of the keyboard is the most important to the
touch-typist.When at rest the typist's fingers are positioned,
lightly, on the A-S-D-F keys for the
left hand, and the J-K-L-; keys
for the right hand.
The left index finger will control the
F and G keys, the right index
finger will control the J and H
The left middle finger will control the
D key, the right middle
finger will control the K key.
The left ring finger will control the
S key, the right ring
finger will control the L key.
The left little finger will control the
A key, the right little
finger will control the ; key.
The spacebar is controlled by the
right thumb.
The home row.
LEFT HANDRIGHT HAND
LFRFMFIFIFIFIFMFRFLF
LF = little finger,
RF = ring finger,
MF = middle finger,
IF = index finger
The F and J keys often
have small raised bumps on their tops, a
tactile aid for the typist.
The locations of all the other keys on the keyboard are learned
in relation to these home keys so the touch-typist must be able
to find the home keys by touch.
Using the raised
bumps on the F and J
keys as a guide, see if you can put your fingers on
the home row correctly, without looking at the keyboard. No
Make sure you are sitting up straight, your feet flat on the floor. Keep your elbows close to your body, your wrists straight and your forearms level, and remember - .
When you are ready to begin, select an exercise and strike the key requested. Try not to look at the
keyboard. It will be difficult at first but as the exercise
progresses you will find it becomes easier and your fingers will
begin to move without you consciously deciding which finger is
associated with which key.
You may find it helpful to quietly say the name of
the key as you strike it.Don't let your mistakes cause you to
lose heart, touch typing is a skill that can be learned by
Repeat each exercise at least three times.家的钥匙游戏_TheKeytoHome中文硬盘版_飞翔游戏
单机游戏下载单机游戏下载基地
当前位置： →
→ 家的钥匙(The Key to Home) 中文版
家的钥匙(The Key to Home) 中文版
游戏语言：中文
游戏大小：0KB
更新时间：
发行时间：2017年
游戏类型：普通
游戏标签：
家的钥匙TheKeytoHome是一款非常有趣而且有爱的悬疑向推理文字类游戏，游戏中的故事发生在一所小学。主要讲述了他们的一位老师拥有恋童癖，而几次的偷拍行为都被班上的女童给抓住了把柄，从而开始加入隐藏在学校中神秘集团探索的推理过程。整体的画风以及内容
暂无相关下载，敬请期待！
家的钥匙(The Key to Home)是一款非常有趣而且有爱的悬疑向推理文字类游戏，游戏中的故事发生在一所小学。主要讲述了他们的一位老师拥有恋童癖，而几次的偷拍行为都被班上的女童给抓住了把柄，从而开始加入隐藏在学校中神秘集团探索的推理过程。整体的画风以及内容都颇具欢乐以及正能量，带给你不少的青春回忆！游戏介绍这是一款以校园为主题的萝莉风剧情文字游戏，虽然是一款galgame，有些部分比较敏感，但他们对这些行为是坚决反对的，游戏中也对此进行了批判，而且自始至终没有任何直接的性描写。相反，这个游戏的主线讲的是几位小学生发现学校黑幕后，联合老师，最终用智慧摧毁犯罪集团的正能量故事。另外游戏中的故事情节中保留了对违法犯罪行为的批判，没有过于越界的镜头，整体的剧情风格还算是清新有爱。游戏特色1、以剧情为主的清新校园故事2、多个不同的幼女角色3、大量的文本内容4、丰富的支线剧情以及多结局探索5、全程人物配音人物介绍佐久间 梨香小学四年级的女童。虽然智能很高但是性格最差，把大人玩弄在掌心的小恶魔娘。利用呆弱教师黑柳的弱点，将他卷进自己的计划中。Position：小学四年级生Age：9Symbol：红心Voice：纱友黑柳 博士被同僚及都多少看不起的呆弱。是重度的罗丽控，在学校的厕所内设置偷拍摄影机的犯罪者。虽然被女主角的幼女设陷利用，但连那都似乎感到高兴的无可救药的变态。Position：小学校师Age：25Symbol：鬼牌风见 纪子正义感强的认真孩子。为了守护学校的秩序，严格取缔违反校规的人。最近的兴趣是在好坏事记录簿上纪录问题儿童（主要是晶）的问题行动。Position：小学四年级生。班上的风纪委员＆风纪委员长Age：9Symbol：黑桃Voice：远藤 茉爱狮童 晶身上穿着辣妹系服饰的活泼的少女。常常跷课且上课中常在玩扑克牌游戏。到处搜寻金钱的气息，很麻烦。Position：小学四年级生Age：10Symbol：方块Voice：犬饲 あお橘 美沙总是呆呆的。平时都笑嘻嘻的。对于状况不太能理解。可爱的穿着西装式制服。Position：中学1年级生Age：12Symbol：梅花Voice：小山 ハル神宫寺在太太之间很有人气的年轻爽朗的校长。其实对于权力很有野望，最终目的是要当市长而正在出马竞选准备中的野心家。Position：小学校长Age：32Symbol：国王配置要求操作系统:&Windows 7 or later处理器:&Dual core CPU @2GHz (Pentium D or better)内存:&4 GB RAM图形:&Intel HD 4000, GeForce 8800, ATI 1950 or betterDirectX 版本:&11网络:&宽带互联网连接存储空间:&需要 5 GB 可用空间安装方法1、下载压缩包解压2、直接进入游戏视频欣赏
327.2M / 05-10
RPG角色扮演
261.1M / 05-10
RPG角色扮演
183.5M / 05-10
RPG角色扮演
本类游戏下载排行
RTS即时战略 / 939.6M
SLG休闲益智 / 211.2M
STG射击游戏 / 132.8M
SLG休闲益智 / 156M
STG射击游戏 / 61.9M
AVG冒险游戏 / 41.8M
STG射击游戏 / 615M
STG射击游戏 / 2.03G
RPG角色扮演 / 0KB
RPG角色扮演 / 0KB当前位置：→→→家门钥匙
游戏类型：
游戏语言：简体中文
游戏大小：500MB
游戏制作： Katsudou Mangaya
游戏发行： Henteko Doujin
上市时间：
操作系统：Win7, Win8, Win10
更新时间：
《家门钥匙（The Key to Home ）》是一款剧情向的冒险类游戏，该作的画风十分的温馨可人，而人物立绘也是栩栩如生，玩家们将会在唯美的环境下经历一段精彩的剧情故事，而游戏的整体氛围十分的悬疑，大家在这里将会感受到谎言，欺骗，背叛，学生会与老师相互斗争，至于丰富性的游戏内容绝对不会令各位失望！所以有兴趣的朋友们切莫错过了！
黑柳博士，是一个经历过失败人生的小学老师，现如今他被一个恶魔般聪明伶俐的女孩佐久间梨香给胁迫了，要去抢劫学校内一笔价值数千万日元的隐藏财富。
谎言，欺骗，背叛&在这部悬疑视觉小说内，老师和学生互相斗争，争夺统治地位。
而谁又会站出来宣称学校内的这些隐藏的财富?
这是一部悬疑视觉小说，适合所有喜欢小女孩的绅士和淑女们游玩！
佐久间梨香
一个四年级的女孩，尽管她有反社会的倾向，却很聪明。她用她顽皮的技巧使成年人适应她的幻想。在发现了Hiroshi的黑暗秘密后，她用它来对付他，招募他进入一个抢劫计划。
工作:四年级小学生
声优:紗友(Sayu)
一个不称职的老师，被同事和学生都看不起。他有一个严重的洛丽塔情结，甚至在学校的洗手间里设置了隐蔽的摄像头。他已经完全陷入了女主角的陷阱，但他是一个病态的怪人，他真的很享受这个过程。
工作:四年级的老师
一个在学校里维护正义和秩序的荣誉学生。她喜欢在自己的笔记本上记录问题儿童(主要是Akira)。
工作:4年级，霍尔班长，班级代表。
声优:遠藤 茉愛(Mame Endou)
一个狂野而有活力的女孩，公然蔑视学校的着装规范。作为核心的麻烦制造者，她总是在寻找一个快速的巴克，并且倾向于逃课和打牌。
工作:4年级
声优:犬飼 あお(Ao Inukai)
剧中的学习
一个心不在焉的女孩，她总是面带微笑，即使她不明白她周围发生了什么。她喜欢穿她可爱又时髦的校服。
工作:初一初中生
象征:三叶草
声音:小山ハル(Haru小山)
一个年轻的小学校长，因为他的干净形象而受到父母的欢迎。然而，事实是，他是一个贪婪、渴望权力的骗子，他正准备宣布竞选市长。
工作:小学校长
迅雷提示“任务出错”，请查看，下载前查看游戏说明和网友评论，游戏问题可以参考在线学习。
游戏可能被某些杀毒软件提示，部分报毒与破解汉化有关，请谨慎下载。如下载失效，请至举报。
本站仅创建用户沟通交流的信息平台，所展示的游戏/软件内容来均来自于第三方用户上传分享，资源仅作为用户间分享讨论之用，除开发商授权外不以盈利为目的。如果侵犯了您的权益，请，我们将第一时间处理。
大家都在玩
解谜冒险游戏推荐
最新游戏推荐
热门游戏推荐I (冲) into my home to get the key to my classroom. 题目和参考答案——精英家教网——
暑假天气热？在家里学北京名师课程，
& 题目详情
(冲) into my home to get the key to my classroom.
& 3. rushed
题目来源： &
练习册系列答案
科目：初中英语
7. The Blacks
(have) their Christmas dinner at present.
科目：初中英语
() 11. What does today's newspaper
about the hot weather these days?&&&A. speak&&&B. talk&&&C. tell D. say
科目：初中英语
9. The Greens
(have) a picnic if it is fine this Sunday morning.
科目：初中英语
& & Harry didn't stop his car at the traffic lights when they were red,and he hit another car. Harry jumped out and went to it. There was an old man in the car. He was afraid and shouted to Harry ,“What are you doing? You nearly killed (差点杀死) me!”& &“Yes ,” Harry answered, “I'm sorry." He took a bottle out of his car and said ,“Drink some of this,then you’ll feel better." He gave the man some wine (酒) ，and the man drank it,but he shouted again ,“You nearly killed me."& &Harry gave him the bottle again,and the man drank a lot of the wine. Then he smiled and said to Harry ,“Thank you,I feel much better now. But why aren’t you drinking?”Oh,well,,Harry answered, I don't want any wine now. I'm going to sit here and wait for the police."() 6. Harry hit another car because
&.&&&A. he broke the traffic rules & &B.he drank too much wine at home&&&C. he wanted to kill the man&&&D. he wanted to drive the man's car() 7. After he hit the car,Harry .&&&A. was very happy&&&B. didn't think he was wrong&&&C. was very busy&&&D. was juiet and had an idea() 8. At first the old man was
.&&&A. glad for Harry&&&B. angry with Harry&&&C. really dying&&&D. wounded (受伤)() 9. Harry gave the old man a bottle of wine to & &.&&&A. make the old man sad&&&B. make fhc old man drive his car&&&C. fool (愚弄) the old man I) , make the old man stop driving() 10. Which of the following sentences is true?&&&A. The old man didn't like to drink wine.&&&B. The old man wanted to go to the police station.&&&C. Harry was very angry with the old man.&&&D. Harry was not afraid to see the police at last.
科目：初中英语
8. What did you learn today?—The teacher told us to give
to the old people on the bus.
科目：初中英语
() 5. The bag is full. You
put anything else in it now.&&&A. could&&&B. didn't&&&C. need&&&D. can't
科目：初中英语
2. He is a clever boy.(改为感叹句) the boy is!
科目：初中英语
() 1. great fun the students are having playing football now!&&&A. How&&&B. What&&&C. What a&&&D. How a
精英家教网新版app上线啦！用app只需扫描书本条形码就能找到作业，家长给孩子检查作业更省心，同学们作业对答案更方便，扫描上方二维码立刻安装！
请输入姓名
请输入手机号C语言 c++ php mysql nginx linux lnmp lamp lanmp memcache redis 面试 笔记 ppt 设计模式 问题 远程连接 草榴 草榴社区 caoliu
Nginx需要依赖下面3个包
1. gzip 模块需要 zlib 库 ( 下载: http://www.zlib.net/ ) &zlib-1.2.8.tar.gz
2. rewrite 模块需要 pcre 库 ( 下载: http://www.pcre.org/ ) &pcre-8.21.tar.gz
3. ssl 功能需要 openssl 库 ( 下载: http://www.openssl.org/ ) &openssl-1.0.1.tar.gz
注意：如果用源码安装的话，后面nginx安装的时候需要指定&--with-pcre 对应的压缩包路径，如果用二进制包安装则不需指定
依赖包一键安装：&yum -y install zlib zlib-devel openssl openssl--devel pcre pcre-devel
yum -y groupinstall "Development Tools" "Development Libraries" 此命令可以一键安装开发工具包
安装命令：
tar -xzvf openssl-1.0.1.tar.gz
cd openssl-1.0.1
./config(注意) && make && make install
tar -xzvf pcre-8.21.tar.gz
cd pcre-8.21
./configure
&& make && make install
tar -xzvf zlib-1.2.8.tar.gz
cd zlib-1.2.8
./configure
&& make && make install
nginx安装命令： nginx各个版本下载地址：http://nginx.org/download/
groupadd -r nginx
useradd -r -g nginx -s /bin/false -M nginx
#注意 \ 前面至少一个有空格
./configure --sbin-path=/usr/local/nginx/nginx \
--conf-path=/usr/local/nginx/nginx.conf \
--pid-path=/usr/local/nginx/nginx.pid \
--with-http_ssl_module \
--with-pcre=../pcre-8.21 \
#指向解压的源码目录
--with-zlib=../zlib-1.2.8 \
#指向解压的源码目录
--with-openssl=../openssl-1.0.1 \ #指向解压的源码目录
--with-http_stub_status_module \#启用 nginx 的 NginxStatus 功能，用来监控 Nginx 的当前状态
--user=nginx \
--group=nginx
&注：编译好的nginx可以通过&/usr/local/nginx/nginx&-V &（具体路径以安装的为主） 查看编译时候的参数
/usr/local/nginx/nginx #不指定配置文件地址 /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf #指定配置文件地址
sudo kill `cat /usr/local/nginx/nginx.pid`
服务控制脚本（todo）
浏览器中输入localhost如果可以看到欢迎界面则安装成功
虚拟主机配置
只需更改 server_name 为对应的网站域名即可
检测配置文件
/usr/local/nginx/nginx -t
重新加载配置文件(不停止服务)
/usr/local/nginx/nginx -s reload
打开目录浏览功能
location / {
#打开目录列表
autoindex_exact_ #on显示文件的确切大小，off则会用M、G等单位
autoindex_ #显示文件服务器时间，off显示GMT时间
index.html index.
Nginx编译参数解析
&prefix #nginx安装目录，默认在/usr/local/nginx
&pid-path #pid问件位置，默认在logs目录
&lock-path #lock问件位置，默认在logs目录
&with-http_ssl_module #开启HTTP SSL模块，以支持HTTPS请求。
&with-http_dav_module #开启WebDAV扩展动作模块，可为文件和目录指定权限
&with-http_flv_module #支持对FLV文件的拖动播放
&with-http_realip_module #支持显示真实来源IP地址
&with-http_gzip_static_module #预压缩文件传前检查，防止文件被重复压缩
&with-http_stub_status_module #取得一些nginx的运行状态
&with-mail #允许POP3/IMAP4/SMTP代理模块
&with-mail_ssl_module #允许POP3／IMAP／SMTP可以使用SSL／TLS
&with-pcre=../pcre-8.11 #注意是未安装的pcre路径
&with-zlib=../zlib-1.2.5 #注意是未安装的zlib路径
&with-debug #允许调试日志
&http-client-body-temp-path #客户端请求临时文件路径
&http-proxy-temp-path #设置http proxy临时文件路径
&http-fastcgi-temp-path #设置http fastcgi临时文件路径
&http-uwsgi-temp-path=/var/tmp/nginx/uwsgi #设置uwsgi 临时文件路径
&http-scgi-temp-path=/var/tmp/nginx/scgi #设置scgi 临时文件路径
pcre安装日志
pcre-8.21 configuration summary:
Install prefix .................. : /usr/local
C preprocessor .................. : gcc -E
C compiler ...................... : gcc
C++ preprocessor ................ : g++ -E
C++ compiler .................... : g++
Linker .......................... : /usr/bin/ld
C preprocessor flags ............ :
C compiler flags ................ : -O2
C++ compiler flags .............. : -O2
Linker flags .................... :
Extra libraries ................. :
Build C++ library ............... : yes
Enable JIT compiling support .... : no
Enable UTF-8 support ............ : no
Unicode properties .............. : no
Newline char/sequence ........... : lf
\R matches only ANYCRLF ......... : no
EBCDIC coding ................... : no
Rebuild char tables ............. : no
Use stack recursion ............. : yes
POSIX mem threshold ............. : 10
Internal link size .............. : 2
Match limit ..................... :
Match limit recursion ........... : MATCH_LIMIT
Build shared libs ............... : yes
Build static libs ............... : yes
Use JIT in pcregrep ............. : no
Buffer size for pcregrep ........ : 20480
Link pcregrep with libz ......... : no
Link pcregrep with libbz2 ....... : no
Link pcretest with libreadline .. : no
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
make[1]: Entering directory `/root/software/pcre-8.21'
test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib"
/bin/sh ./libtool
--mode=install /usr/bin/install -c
libpcre.la libpcreposix.la libpcrecpp.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libpcre.so.0.0.1 /usr/local/lib/libpcre.so.0.0.1
libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so.0 || { rm -f libpcre.so.0 && ln -s libpcre.so.0.0.1 libpcre.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.0.0.1 libpcre. }; })
libtool: install: /usr/bin/install -c .libs/libpcre.lai /usr/local/lib/libpcre.la
libtool: install: warning: relinking `libpcreposix.la'
libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool
--tag CC --mode=relink gcc -O2 -version-info 0:0:0 -o libpcreposix.la -rpath /usr/local/lib pcreposix.lo libpcre.la )
libtool: relink: gcc -shared
-fPIC -DPIC
.libs/pcreposix.o
-Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre
-Wl,-soname -Wl,libpcreposix.so.0 -o .libs/libpcreposix.so.0.0.0
libtool: install: /usr/bin/install -c .libs/libpcreposix.so.0.0.0T /usr/local/lib/libpcreposix.so.0.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.0 libpcreposix.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.0 libpcreposix. }; })
libtool: install: /usr/bin/install -c .libs/libpcreposix.lai /usr/local/lib/libpcreposix.la
libtool: install: warning: relinking `libpcrecpp.la'
libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool
--tag CXX --mode=relink g++ -O2 -version-info 0:0:0 -o libpcrecpp.la -rpath /usr/local/lib pcrecpp.lo pcre_scanner.lo pcre_stringpiece.lo libpcre.la )
libtool: relink: g++
-fPIC -DPIC -shared -nostdlib /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crti.o /usr/lib/gcc/i686-redhat-linux/4.4.4/crtbeginS.o
.libs/pcrecpp.o .libs/pcre_scanner.o .libs/pcre_stringpiece.o
-Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre -L/usr/lib/gcc/i686-redhat-linux/4.4.4 -L/usr/lib/gcc/i686-redhat-linux/4.4.4/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i686-redhat-linux/4.4.4/crtendS.o /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crtn.o
-Wl,-soname -Wl,libpcrecpp.so.0 -o .libs/libpcrecpp.so.0.0.0
libtool: install: /usr/bin/install -c .libs/libpcrecpp.so.0.0.0T /usr/local/lib/libpcrecpp.so.0.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.0 libpcrecpp. }; })
libtool: install: /usr/bin/install -c .libs/libpcrecpp.lai /usr/local/lib/libpcrecpp.la
libtool: install: /usr/bin/install -c .libs/libpcre.a /usr/local/lib/libpcre.a
libtool: install: chmod 644 /usr/local/lib/libpcre.a
libtool: install: ranlib /usr/local/lib/libpcre.a
libtool: install: /usr/bin/install -c .libs/libpcreposix.a /usr/local/lib/libpcreposix.a
libtool: install: chmod 644 /usr/local/lib/libpcreposix.a
libtool: install: ranlib /usr/local/lib/libpcreposix.a
libtool: install: /usr/bin/install -c .libs/libpcrecpp.a /usr/local/lib/libpcrecpp.a
libtool: install: chmod 644 /usr/local/lib/libpcrecpp.a
libtool: install: ranlib /usr/local/lib/libpcrecpp.a
libtool: finish: PATH="/usr/lib/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/mysql/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
openssl安装日志
[root@localhost openssl-fips-2.0.2]# make install
if [ -n "libcrypto" ]; then \
EXCL_OBJ='aes-586.o aesni-x86.o bn-586.o co-586.o x86-mont.o x86-gf2m.o des-586.o crypt586.o x86cpuid.o sha1-586.o sha256-586.o sha512-586.o ghash-x86.o ../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' ; export EXCL_OBJ ; \
ARX='/usr/bin/perl ${TOP}/util/arx.pl ar
fi ; export ARX ; \
if [ y = "y" ]; then \
AS='/usr/bin/perl ${TOP}/util/fipsas.pl ${TOP} ${&} gcc' ; \
AS='gcc -c' ; \
fi ; export AS ; \
dir= target= if expr " crypto fips test
" : ".* $dir " &/dev/null 2&&1; then if [ -d "$dir" ]; then (
cd $dir && echo "making $target in $dir..." && TOP= && unset TOP ${LIB+LIB} ${LIBS+LIBS} ${INCLUDE+INCLUDE} ${INCLUDES+INCLUDES} ${DIR+DIR} ${DIRS+DIRS} ${SRC+SRC} ${LIBSRC+LIBSRC} ${LIBOBJ+LIBOBJ} ${ALL+ALL} ${EXHEADER+EXHEADER} ${HEADER+HEADER} ${GENERAL+GENERAL} ${CFLAGS+CFLAGS} ${ASFLAGS+ASFLAGS} ${AFLAGS+AFLAGS} ${LDCMD+LDCMD} ${LDFLAGS+LDFLAGS} ${SHAREDCMD+SHAREDCMD} ${SHAREDFLAGS+SHAREDFLAGS} ${SHARED_LIB+SHARED_LIB} ${LIBEXTRAS+LIBEXTRAS} && make -e PLATFORM='linux-elf' PROCESSOR='' CC='gcc' CFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM' ASFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c' AR='ar
r' NM='nm' RANLIB='/usr/bin/ranlib' CROSS_COMPILE='' PERL='/usr/bin/perl' ENGDIRS='ccgost' SDIRS='sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac' LIBRPATH='/usr/local/ssl/fips-2.0/lib' INSTALL_PREFIX='' INSTALLTOP='/usr/local/ssl/fips-2.0' OPENSSLDIR='/usr/local/ssl/fips-2.0' LIBDIR='lib' MAKEDEPEND='$${TOP}/util/domd $${TOP} -MD gcc' DEPFLAG='-DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_BF -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAST -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_IDEA -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_MD5 -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC2 -DOPENSSL_NO_RC4 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_RIPEMD -DOPENSSL_NO_SEED -DOPENSSL_NO_SRP -DOPENSSL_NO_SSL2 -DOPENSSL_NO_SSL3 -DOPENSSL_NO_STORE -DOPENSSL_NO_TLS1 -DOPENSSL_NO_TLSEXT' MAKEDEPPROG='gcc' SHARED_LDFLAGS='' KRB5_INCLUDES='' LIBKRB5='' ZLIB_INCLUDE='' LIBZLIB='' EXE_EXT='' SHARED_LIBS='libcrypto.so.1.1.0 libssl.so.1.1.0' SHLIB_EXT='.so.1.1.0' SHLIB_TARGET='linux-shared' PEX_LIBS='' EX_LIBS='-ldl' CPUID_OBJ='x86cpuid.o' BN_ASM='bn-586.o co-586.o x86-mont.o x86-gf2m.o' DES_ENC='des-586.o crypt586.o' AES_ENC='aes-586.o aesni-x86.o' CMLL_ENC='cmll-x86.o' BF_ENC='bf-586.o' CAST_ENC='c_enc.o' RC4_ENC='rc4-586.o' RC5_ENC='rc5-586.o' SHA1_ASM_OBJ='sha1-586.o sha256-586.o sha512-586.o' MD5_ASM_OBJ='md5-586.o' RMD160_ASM_OBJ='rmd-586.o' WP_ASM_OBJ='wp_block.o wp-mmx.o' MODES_ASM_OBJ='ghash-x86.o' PERLASM_SCHEME='elf' FIPSLIBDIR='' FIPSCANLIB="${FIPSCANLIB:-libcrypto}" FIPSCANISTERINTERNAL='y' FIPSCANISTERONLY='y' FIPS_EX_OBJ='../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' THIS=${THIS:-build_crypto} MAKEFILE=Makefile MAKEOVERRIDES= TOP=.. DIR=$dir $target ) || exit 1; fi; fi
making fips in crypto...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto'
[ -n "sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac" ] && for i in sha hmac des aes modes bn ec rsa dsa ecdsa dh b do \
( obj=`/usr/bin/perl ../util/fipsobj.pl $i` && \
cd $i && echo "making fips in crypto/$i..." && \
make -e TOP=../.. DIR=$i INCLUDES='-I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include ' $obj ) || exit 1; \
making fips in crypto/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha'
make[2]: &sha1dgst.o&是最新的。
make[2]: &sha256.o&是最新的。
make[2]: &sha512.o&是最新的。
make[2]: &sha1-586.o&是最新的。
make[2]: &sha256-586.o&是最新的。
make[2]: &sha512-586.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha'
making fips in crypto/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
make[2]: &hmac.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
making fips in crypto/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des'
make[2]: &cfb64ede.o&是最新的。
make[2]: &cfb64enc.o&是最新的。
make[2]: &cfb_enc.o&是最新的。
make[2]: &ecb3_enc.o&是最新的。
make[2]: &ofb64ede.o&是最新的。
make[2]: &fcrypt.o&是最新的。
make[2]: &set_key.o&是最新的。
make[2]: &des-586.o&是最新的。
make[2]: &crypt586.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des'
making fips in crypto/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes'
make[2]: &aes_cfb.o&是最新的。
make[2]: &aes_ecb.o&是最新的。
make[2]: &aes_ofb.o&是最新的。
make[2]: &aes-586.o&是最新的。
make[2]: &aesni-x86.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes'
making fips in crypto/modes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes'
make[2]: &cbc128.o&是最新的。
make[2]: &ccm128.o&是最新的。
make[2]: &cfb128.o&是最新的。
make[2]: &ctr128.o&是最新的。
make[2]: &gcm128.o&是最新的。
make[2]: &ofb128.o&是最新的。
make[2]: &xts128.o&是最新的。
make[2]: &ghash-x86.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes'
making fips in crypto/bn...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn'
make[2]: &bn_add.o&是最新的。
make[2]: &bn_blind.o&是最新的。
make[2]: &bn_ctx.o&是最新的。
make[2]: &bn_div.o&是最新的。
make[2]: &bn_exp2.o&是最新的。
make[2]: &bn_exp.o&是最新的。
make[2]: &bn_gcd.o&是最新的。
make[2]: &bn_gf2m.o&是最新的。
make[2]: &bn_lib.o&是最新的。
make[2]: &bn_mod.o&是最新的。
make[2]: &bn_mont.o&是最新的。
make[2]: &bn_mul.o&是最新的。
make[2]: &bn_nist.o&是最新的。
make[2]: &bn_prime.o&是最新的。
make[2]: &bn_rand.o&是最新的。
make[2]: &bn_recp.o&是最新的。
make[2]: &bn_shift.o&是最新的。
make[2]: &bn_sqr.o&是最新的。
make[2]: &bn_word.o&是最新的。
make[2]: &bn_x931p.o&是最新的。
make[2]: &bn-586.o&是最新的。
make[2]: &co-586.o&是最新的。
make[2]: &x86-mont.o&是最新的。
make[2]: &x86-gf2m.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn'
making fips in crypto/ec...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec'
make[2]: &ec_curve.o&是最新的。
make[2]: &ec_cvt.o&是最新的。
make[2]: &ec_key.o&是最新的。
make[2]: &ec_lib.o&是最新的。
make[2]: &ecp_mont.o&是最新的。
make[2]: &ec_mult.o&是最新的。
make[2]: &ecp_nist.o&是最新的。
make[2]: &ecp_smpl.o&是最新的。
make[2]: &ec2_mult.o&是最新的。
make[2]: &ec2_smpl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec'
making fips in crypto/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
make[2]: &rsa_eay.o&是最新的。
make[2]: &rsa_gen.o&是最新的。
make[2]: &rsa_crpt.o&是最新的。
make[2]: &rsa_none.o&是最新的。
make[2]: &rsa_oaep.o&是最新的。
make[2]: &rsa_pk1.o&是最新的。
make[2]: &rsa_pss.o&是最新的。
make[2]: &rsa_ssl.o&是最新的。
make[2]: &rsa_x931.o&是最新的。
make[2]: &rsa_x931g.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
making fips in crypto/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
make[2]: &dsa_gen.o&是最新的。
make[2]: &dsa_key.o&是最新的。
make[2]: &dsa_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
making fips in crypto/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
make[2]: &ecs_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
making fips in crypto/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh'
make[2]: &dh_check.o&是最新的。
make[2]: &dh_gen.o&是最新的。
make[2]: &dh_key.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh'
making fips in crypto/buffer...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
make[2]: &buf_str.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
making fips in crypto/evp...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp'
make[2]: &e_aes.o&是最新的。
make[2]: &e_des3.o&是最新的。
make[2]: &e_null.o&是最新的。
make[2]: &m_sha1.o&是最新的。
make[2]: &m_dss1.o&是最新的。
make[2]: &m_dss.o&是最新的。
make[2]: &m_ecdsa.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp'
making fips in crypto/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
make[2]: &ech_key.o&是最新的。
make[2]: &ech_ossl.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
making fips in crypto/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[2]: &cmac.o&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto'
making all in fips...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
making all in fips/sha...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha'
making all in fips/rand...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand'
making all in fips/des...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des'
making all in fips/aes...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes'
making all in fips/dsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa'
making all in fips/ecdh...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
making all in fips/ecdsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
making all in fips/rsa...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa'
making all in fips/dh...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh'
making all in fips/cmac...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac'
making all in fips/hmac...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac'
making all in fips/utl...
make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[2]: &lib&是最新的。
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
created directory `/usr/local/ssl'
created directory `/usr/local/ssl/fips-2.0'
created directory `/usr/local/ssl/fips-2.0/bin'
created directory `/usr/local/ssl/fips-2.0/lib'
created directory `/usr/local/ssl/fips-2.0/include'
created directory `/usr/local/ssl/fips-2.0/include/openssl'
making install in crypto...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto'
making install in crypto/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha'
making install in crypto/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac'
making install in crypto/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des'
making install in crypto/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes'
making install in crypto/modes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes'
making install in crypto/bn...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn'
making install in crypto/ec...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec'
making install in crypto/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa'
making install in crypto/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa'
making install in crypto/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa'
making install in crypto/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh'
making install in crypto/buffer...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer'
making install in crypto/evp...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp'
making install in crypto/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh'
making install in crypto/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac'
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto'
making install in fips...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips'
making install in fips/sha...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha'
making install in fips/rand...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand'
making install in fips/des...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des'
making install in fips/aes...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes'
making install in fips/dsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa'
making install in fips/ecdh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh'
making install in fips/ecdsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa'
making install in fips/rsa...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa'
making install in fips/dh...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh'
making install in fips/cmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac'
making install in fips/hmac...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac'
making install in fips/utl...
make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl'
make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl'
for i in fipsld fips_standalone_sha1 ; \
echo "installing $i"; \
cp $i /usr/local/ssl/fips-2.0/bin/$i. \
chmod 755 /usr/local/ssl/fips-2.0/bin/$i. \
mv -f /usr/local/ssl/fips-2.0/bin/$i.new /usr/local/ssl/fips-2.0/bin/$i; \
installing fipsld
installing fips_standalone_sha1
cp -p -f fipscanister.o fipscanister.o.sha1 \
fips_premain.c fips_premain.c.sha1 \
/usr/local/ssl/fips-2.0/lib/; \
chmod 0444 /usr/local/ssl/fips-2.0/lib/fips*
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips'
making install in test...
make[1]: Entering directory `/root/software/openssl-fips-2.0.2/test'
make[1]: Nothing to be done for `install'.
make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/test'
zlib安装日志
cp libz.a /usr/local/lib
chmod 644 /usr/local/lib/libz.a
cp libz.so.1.2.8 /usr/local/lib
chmod 755 /usr/local/lib/libz.so.1.2.8
cp zlib.3 /usr/local/share/man/man3
chmod 644 /usr/local/share/man/man3/zlib.3
cp zlib.pc /usr/local/lib/pkgconfig
chmod 644 /usr/local/lib/pkgconfig/zlib.pc
cp zlib.h zconf.h /usr/local/include
chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h
nginx安装日志
Configuration summary
+ using PCRE library: ../pcre-8.21
+ using OpenSSL library: ../openssl-fips-2.0.2
+ md5: using OpenSSL library
+ sha1: using OpenSSL library
+ using zlib library: ../zlib-1.2.8
nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/nginx"
nginx configuration prefix: "/usr/local/nginx"
nginx configuration file: "/usr/local/nginx/nginx.conf"
nginx pid file: "/usr/local/nginx/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp"
_________________________________________________________________
[root@localhost nginx-1.4.5]# make install
make -f objs/Makefile install
make[1]: Entering directory `/root/software/nginx-1.4.5'
test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
test ! -f '/usr/local/nginx/nginx'
|| mv '/usr/local/nginx/nginx'
'/usr/local/nginx/nginx.old'
cp objs/nginx '/usr/local/nginx/nginx'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
cp conf/koi-win '/usr/local/nginx'
cp conf/koi-utf '/usr/local/nginx'
cp conf/win-utf '/usr/local/nginx'
test -f '/usr/local/nginx/mime.types'
|| cp conf/mime.types '/usr/local/nginx'
cp conf/mime.types '/usr/local/nginx/mime.types.default'
test -f '/usr/local/nginx/fastcgi_params'
|| cp conf/fastcgi_params '/usr/local/nginx'
cp conf/fastcgi_params
'/usr/local/nginx/fastcgi_params.default'
test -f '/usr/local/nginx/fastcgi.conf'
|| cp conf/fastcgi.conf '/usr/local/nginx'
cp conf/fastcgi.conf '/usr/local/nginx/fastcgi.conf.default'
test -f '/usr/local/nginx/uwsgi_params'
|| cp conf/uwsgi_params '/usr/local/nginx'
cp conf/uwsgi_params
'/usr/local/nginx/uwsgi_params.default'
test -f '/usr/local/nginx/scgi_params'
|| cp conf/scgi_params '/usr/local/nginx'
cp conf/scgi_params
'/usr/local/nginx/scgi_params.default'
test -f '/usr/local/nginx/nginx.conf'
|| cp conf/nginx.conf '/usr/local/nginx/nginx.conf'
cp conf/nginx.conf '/usr/local/nginx/nginx.conf.default'
test -d '/usr/local/nginx'
|| mkdir -p '/usr/local/nginx'
test -d '/usr/local/nginx/logs' ||
mkdir -p '/usr/local/nginx/logs'
test -d '/usr/local/nginx/html'
|| cp -R html '/usr/local/nginx'
test -d '/usr/local/nginx/logs' ||
mkdir -p '/usr/local/nginx/logs'
make[1]: Leaving directory `/root/software/nginx-1.4.5'
参考地址：http://www.xj123.info/2416.html
&http://www.cnblogs.com/dennisit/archive//2834719.html
&http://blog.s135.com/nginx_php_v6/
http://www.nginx.cn/install
阅读(...) 评论()}
我要回帖
更多关于 the key to homecg 的文章
更多推荐
- ·男生帅气可爱小正太男头像动漫分享｜漫画风太帅了😍
- ·招财转运网名头像，换了会有好运哦🍀
- ·📸ins风高级质感背景图感女生ins背影头像来啦💃
- ·他这是什么他的表情从愤怒到蒙圈？
- ·余利宝平安理财天天成长6号安全吗优享版跟里面的稳健理财产品有什么区别？
- ·有没有狂野飙车8破解版9的破解版呀，谢谢
- ·是哪个名人成功事例？
- ·吃降压药能皮秒激光祛斑斑吗
- ·脊髓空洞症中晚期症状病人多吃哪些水果对身体好
- ·心脏快速治烧心小妙招难受怎么缓解
- ·山荆子和杜梨树手串有什么区别
- ·郑州代做标书公司的标书制作工作室在哪里？
- ·现在带着小腿疼带着大腿也疼都疼了，怎么也治
- ·HPV81阳性，曾经有宫颈糜烂会引起hpv18阳性吗，怎么办
- ·脑鸣还有治好的希望吗？
- ·如何解决电镀锌会不会生锈勾花网容易生锈的问题
- ·心腹胀痛，隔夜宿食是指不消，跌打损伤作痛怎么办
- ·三瓦窑到新都西南民族大学怎么走
- ·学院的蹴球场地是什么材质的
- ·求the key to home 游戏e
- ·怡口净水器为什么那么贵超滤机中出来的水是否适合小孩子喝？不会把水中的矿物质都滤掉吗？
- ·BB蓄电池在汽车电瓶不拆能充电吗上能用吗
- ·什么情况下要切除美国人对胆囊切除看法
- ·女性内分泌紊乱的症状吃什么调理
- ·有没有想兼职的留下起个漂亮的微信号号
- ·三坐标测量同心度怎么不准跳动
- ·半封闭阳光房房如何遮阳最经济
- ·读英语单词在线发音翻译。
- ·virtual time had taken up mostly om 2018time that of
- ·儿童夜间流鼻血是不是吃汤臣倍健钙铁锌女生能吃吗锌片有关吗小孩5岁
- ·为什么得小孩白血病的早期症状农村孩子越来越多，这次
- ·智伴机器怎么加盟代理人代理选哪个牌子好
- ·科目二坡道总是熄火怎么办
- ·电大2439宿舍怎么样，一般生活费需要多少，电子商
- ·目前再58同城找工作 招聘我想问下普工的情况 普工的工资普遍是多少啊？让我心里有个谱
