三维连续冲模设计软件
3DQuickPress是3DQuickTools跟智诚科技ICT共同合作研发的一套完全整合于SolidWorks的三维连续冲模设计解决方案，是SolidWorks公司认证的黄金合作伙伴。与SolidWorks统一界面，完全一致的使用风格。本系统包含零件分析及展开、料带布排、模架及冲头设计等功能，为电子、家电及汽车结构设计等行业提供从三维建模，零件展开，三维组装到二维出图的完整解决方案。
3DQuickPress唯一使用3D才能解决在2D作业中所无法预知的错误并透过达到快速准确的冲模设计。3DQuickPress是SolidWorks对于冲模设计的解决方案软件。直接透过3D模型，迅速完成连续冲模的设计，并透过eDrawing有效地达到资料沟通，因而能在短期间完成冲模设计。强大的钣金特微辨识处理技术可以快速依据SolidWorks钣金或其他CAD系统输入的零件料所提供的资料库来计算出弹性与弯曲的误差，以及冲压行程的调整与模具的自动产生。
"想轻松下载文件吗？CAD1邀请您加入本站VIP会员，享受极速下载体验！"
Download uploaded
手机扫一扫：
与本文相关的文章3DQuickPress_PRL Overview概述
3DQuickPress_Insert_User Define Component 入子零件与组件
3DQuickPress_Cutting Punch with insert冲裁冲头（带XY入子）
3DQuickPress-料带图纸技巧(语音讲解).视频
3DQuickPress SLDrawing - 中文模板
3DQuickPress_5.3.0 PRL wizard_Update.视频
3DQuickPress-更改模架结构技巧.视频
3DQuickPress统计所有零件长宽高至BOM.视频
3DQuickPress圆形冲子-相同而转向之处理方法(语音).视频
3DQuickPress芯片排位.视频
3DQuickPress芯片冲裁设计.视频
3DQuickPress统计所有零件长宽高至BOM&
3DQuickPress_5.3.0 PRL wizard_Update.视频
3DQuickPress-更改模架结构技巧.视频
3DQuickPress_rect forming punch and assembly矩形成形零件与组件
3DQuickPress_Bend Punch折弯冲头原理
3DQuickPress_Pilot_User Define Component
3DQuickPress_模架分板
3DQuickPress_KR for direction关键参考边线
3DQuickPress_Quick Insert Lifters 快速插入浮升组件
3DQuickPress &浮升销示范.视频
3DQuicPress快速设定两用销-制作过程.视频
3DQuickPress_3DQuickPress自定义标准件
3DQuickPress_标准零件篇.视频
"想轻松下载文件吗？CAD1邀请您加入本站VIP会员，享受极速下载体验！"
Download uploaded
手机扫一扫：
与本文相关的文章CATI Tech Notes: 3DQuickPress
SOLIDWORKS Tips and Tricks and Info on Professional 3D Printing with Stratasys from the Technical staff of CATI.
PRL's are the cornerstone capability available in the 3DQuickPress environment. The PRL technology is used to automate and leverage SolidWorks and 3DQuickPress data in order to speed up the creation and editing of assemblies, parts, and drawing files according to a designer's and or a companies' standard best practices.
The PRL's will update to the new size X,Y and Z following the die set structure when inserted into the design with a completed Detail Drawing, ability to the add Properties, BOM, Standard Components, Standard Fasteners, Dowels and Jack Screw information 1 time to the PRL's.
Welcome to Create PRL's (Production Ready Library's) using 3DQuickPress inside of SolidWorks.
Setup and Required information
When naming of the PRL's the user will need to consider Microsoft 256 character limit imposed on path/file names.
The user should name the PRL's to a standard set by the company so multiple user with understand the abbreviated names using a cheat sheet could solve the learning curve of abbreviated names, but I would suggest keeping them as short as possible.
3DQPress PRL Rules
Defining a PRL to b will this PRL have Standard Components or other parts files added (Yes, No) if Yes = Assembly - If No = Part.
When and where to insert a
they should always be inserted into a part file. Exceptions to this rule, 1st - If you are building a Die Set Template, 2nd – Never insert a die set structure into a standard component.
Using a top level sketch to control the size, location and the amount of standard components inserted. This can be done by the following, 1st by inserting a part file to contain all of the sketches, 2nd is to just add the sketches to the assembly top level.
Adding the sketch will require deriving each sketch into the part file using SolidWorks to locate information, which will help eliminate SolidWorks loss of reference when opening the part file.
Prl's are not limited to a single plates or assembly's, they can be built as robust as needed for the user to same time Designing Tooling by following the rules above.
3DQuickPress Controls for PRL behavior
  
  Properties
UC/MC/LC - You can control where Punch PRLs will be inserted into assemblies by using this property if using a Horizontal assembly.
This property is only valid in Punch Design, and the possible values are:
LC - Lower Container (assembly)
MC - Middle Container (assembly)
UC - Upper Container (assembly)
F-SH - (Yes | No) – This property is for extra small PRL's with a retaining heel.
Update Flag - (Yes | No) – This enables or disables the PRL parameters to be updated is a 3DQuickPress specific parameter is changed and the die is told to update.INS (Yes | No) – inserts in the lower die block.
XSL (Yes | No) – This property is usually set to a PRL that will form or coin material, when the PRL is inserted this property will automatically export the selected current snap shot of surface faces of the strip layout to part bodies in the PRL. This functionality minimizes unnecessary assembly associativity to reduce rebuild times in SolidWorks. 3DQuickPress COT SET – With TEXT as the type and set the value P1 to the strip layout P1 Strip Layout, P2 for P2 Strip Layout. This is only an example of what you will get if you check.
    
Dimension's Names
Any dimension can be rename to follow information leveraged by 3DQuickPress, a list of those names are as follows.
Unfolded Model
Strip Layout
Progression
StockWidth
Cut Opening Sketch Name
PH HoleSketch – C6 of the DSS
SBP HoleSketch – C5 of the DSS
SP HoleSketch – C4 of the DSS
DP HoleSketch – C3 of the DSS
DS HoleSketch – C2 of the DSS
LDS HoleSketch – C1 of the DSS
Adding &A(0.xx )& to sketch names supports updating land and taper angle when starting a new Punch Design or Modify DSS.
Adding &T(0.xx )& to sketch names will not update taper angle when starting a new Punch Design or Modify DSS.
Update Dimension Inserted Size
LifterLevel
StripperStroke
Lower Parallel
Die Set Dimensions
OverallX-X
OverallY-Y
Param.def file
Adding param.def file will allow the user to Custom set 6 Dimensions as needed, the custom dimensions.
Plane Names
PRL's can also use the offset value to update thickness of part files.
Item's to include when building your PRL's
Add Properties for Part/Drawing Files.
Add Manufacturing Color to Part Files and Standard Parts.
Add Cut Sketches for Wire Block openings as needed.
Thanks and I hope you enjoy &What make PRL's Tick&, please check back for other articles in this series &How to Build PRL's& using the PRL technology to automate and leverage SolidWorks using 3DQuickPress.
Ronnie C. Flaugh
Technical Analyst
This Hotfix will run on SOLIDWORKS 2016 SP1.0 and newer.
This Hotfix is also Windows 10 supported.
        3DQuickPress is always working on improving the user experience, with the new online V6 seat registration the user will find faster response with registration and un-registration of machines. If you still have issues or need help understanding the process you can always call our support line.
Enhancement – Activation system robustness is enhanced.
Enhancement – 3DQuickPress auto recognizes features as the unfolding process is invoked, now the user can switch any feature by right click on the unfold feature and switch it to User Defined Feature.
Strip Layout:
Fixed – Piercing feature profile is fixed.
Fixed – Display of Restrike feature is fixed.
Fixed – Split bend feature is fixed.
Fixed – Force vector calculation for bend feature is fixed.
Utilities:
New – New function added for adding heel feature to cutting punch.
 1. A heel feature can be created on the cutting punch bottom by selecting an edge to the Create Heel function.
New – New function added for adding circular shoulders for round cutting punch.
        1. A round shoulder can be added to the top of a cutting punch by selecting the top face of the cutting punch to the Create Circular Shoulder function. A Chamfer at the bottom of the shoulder can be added by specifying the chamfer angle.
New – New function added for creating insert component on a die plate.
        1. An insert component can be created with the Create Insert function, users have to select the die plate which the insert will be located, and then select the insert area.
    2. Then, users have to input the Width and Length of the insert, or adjust the offset from the 4 sides of the selected insert area.
        3. Finally, users have to specify the corner option of the insert and the depth of the insert on the die plate.
Standard Components:
Enhancement – A &TP& configuration file property is added for screw type standard component to define the thread pitch.
*After running the Hotfix V6.1.3 the 3DQP DieSet Design toolbar should look like the screen shot below after being replaced, if it doesn't we may need to replace your UI to complete the new installation.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickPress V6.1.3, files can be found on our ftp site and please check back to view our other articles in this series of 3DQuickPress V6 What's New.
Ronnie C. Flaugh
Technical Analyst
Many applications come up when developing blank sizes for drawn models, Material type, draw beads and holding force which spreads the stress distribution over the forming. The 3DQuickForm 3.3.0 Hotfix gives the user more tools to complete his job with a less failures.  
Using the Blank Holder feature in 3DQuickForm project.
Apply the Blank Holder feature
Right click on the feature manager tree of 3DQuickForm, select &Set Blank Holder&.
Select blank holder surface and enter the blank holder force in kN.
Compare the results with blank holder feature
Stress distribution without blank holder feature, and Stress distribution with blank holder feature
Using the Drawbead boundary condition in 3DQuickForm project
    Drawbead boundary condition can be applied to the Drawbead edge on the blank holder surface, material flow along the Drawbead edge can be adjusted with the Drawbead restraining force.
To apply the Drawbead boundary condition
Right click on the feature manager tree of 3DQuickForm then select &Add Drawbead BC&
Select blank holder surface and enter blank holder force in kN.
Compare the results with blank holder feature
Thinning plot without applying Drawbead BC, and Thinning plot with applying Drawbead BC
This Hotfix supports SOLIDWORKS 2016 and Windows 10.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickForm V3.3.0. Can be found on our ftp site, please check back to view our articles in this series of 3DQuickForm.
Ronnie C. Flaugh
Technical Analyst
With the new 2, Hotfix releases are Customer driven Enhancements because we understand the importance to customize the 3DQuickPress process or the features to meet Customer needs. 
This Hotfix will update 3DQuickPress version 6.0.0 to 6.1.2, please install 3DQuickPress installation version and apply this patch.
SolidWorks 2016 SP 1.0 supported.
Windows 10 supported.
Activation auto formatting is provided.
New Icon button for User Assisted Recognition PM Page.
Force calculation of Coin, Emboss and UAR Form feature are provide.
EDM Hole sketch defined in Cutting Punch can be converted to the target plate with Component Opening function.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickPress V6.1.2, please check back to view our other articles in this series of 3DQuickPress V6 What's New.
Ronnie C. Flaugh
Technical Analyst
With the new , Hotfix releases are Customer driven Enhancements because we understand the importance to customize the 3DQuickPress process or the features to meet Customer needs. 
This Hotfix will update 3DQuickPress version 6.0.0 to 6.1.1, please install 3DQuickPress installation version and apply this patch.
SolidWorks 2016 SP 1.0 supported.
Windows 10 supported.
User Assist Recognition PM page layout changed.
Branch Transform function for bend feature is added.
Modify blank function for UAR Form feature is added.
Edit blank function for Coin feature is added.
Overbend feature supports zero inner bend radius.
Overbend feature supports negative Overbend values and reverse bend direction.
Overbend feature supports adjusting bend radius.
Filename for die plates created using create die set function will follows filename format in punch design.
New corner treatment type added.
Custom property field is added to define extra drill depth of standard component tap holes.
Export face function supports exporting intermediate bend steps.
Recreate Smart Hole Table function is added.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickPress V6.1.1, please check back to view our other articles in this series of 3DQuickPress V6 What's New.
Ronnie C. Flaugh
Technical Analyst
As many Gold partners are getting ready for SOLIDWORKS 2016, 3DQuickForm 3.2.1 Hotfix positions the software for the release.  
This Hotfix will update 3DQuickForm version 3.2.0 to 3.2.1, please install 3DQuickForm 3.2.0 installation version and apply this patch.
1. Hotfix supports SOLIDWORKS 2016.
2. Hotfix supports Windows 10.
3. Detail solver error message.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickForm V3.2.1. that can be found on our ftp site, Please check back to view our articles in this series of 3DQuickForm.
Ronnie C. Flaugh
Technical Analyst
UAR Bend Tool is not a new feature to 3DQPress, but what’s new is the added functionally.
UAR Bend Tool feature in 3DQPress Strip layout supports the entire standard bend features.
Create Split Bend
Edit Over-bend
Create Un-Bend Feature
Create Re-strike Feature
  
Thanks and I hope you enjoy all of the new enhancements to 3DQuickPress V6.0.4. Please check back to view our other articles in this series of 3DQuickPress V6 What's New.
Ronnie C. Flaugh
Technical Analyst
With the new , Hotfix releases Customer driven Enhancements per request because we understand the importance of enhancements to customize the 3DQuickPress process or the features to meet Customer requests. 
This Hotfix will update 3DQuickPress version 6.0.0 to 6.0.4. Please install 3DQuickPress installation version and apply this patch.
1. Activation server IP changes, license activation program updated.
2. Strip layout out file supports the use of FG macro.
3. Drill hole created by inserting dowel pin will automatically set as dowel hole.
4. Copy and Paste faces supports working in assembly context.
5. Clearance Tool supports the matching of standard drill size for circular clearance.
6. Component Opening supports naming of extrude cut features created with tool component.
7. Modify DSS supports loading and exporting die plate thickness and clearance.
Thanks and I hope you enjoy all of the new enhancements to 3DQuickPress V6.0.4. Please check back to view our other articles in this series of 3DQuickPress V6 What's New.
Ronnie C. Flaugh
Technical Analyst
3DQuickPress Component group function helps the user to create groups all component in a die set assembly, providing tools to animate the components according to die set structure simulating the motion of the stamping process. During the animation of the motion, interference of the components in the die set can also be detected.
To setup a component group according to the die set structure:
Click Toggle Component Group on the 3DQuickTools Die Set Design Toolbar.
RMB on Component Group icon and select Add Die Set Structure.
RMB on Die Set group and select Die Set Motion.
Enter the values for the parameters Progression, Die set Stroke, Stripper Stroke, Stock Level and Progression clearance.
Click Close the Die Set Motion dialog.
Select the strip layout part.
RMB on the SL group and select Add Component to add the strip layout to the SL group.
Select all lifter component in the die set.
RMB on the Lifter group and select Add Component.
To run the die set animation and interference detection:
RMB on Die Set Motion and select Die Set Motion.
Click Animation tab.
Click Play to run simulation.
Click Stop to pause the simulation.
Click Check Interference to check interference at the paused state.
Select the interference group to show the interference area.
Click OK to close the dialog
Ronnie C. Flaugh
Technical Analyst
Ronnie C. Flaugh
Technical Analyst
CATI Search}