更多频道内容在这里查看
爱奇艺用户将能永久保存播放记录
过滤短视频
暂无长视频（电视剧、纪录片、动漫、综艺、电影）播放记录，
按住视频可进行拖动
&正在加载...
收藏成功，可进入
查看所有收藏列表
当前浏览器仅支持手动复制代码
视频地址：
flash地址：
html代码：
通用代码：
通用代码可同时支持电脑和移动设备的分享播放
用爱奇艺APP或微信扫一扫，在手机上继续观看
当前播放时间：
一键下载至手机
限爱奇艺安卓6.0以上版本
使用微信扫一扫，扫描左侧二维码，下载爱奇艺移动APP
其他安装方式：手机浏览器输入短链接http://71.am/udn
下载安装包到本机：
设备搜寻中...
请确保您要连接的设备（仅限安卓）登录了同一爱奇艺账号 且安装并开启不低于V6.0以上版本的爱奇艺客户端
连接失败！
请确保您要连接的设备（仅限安卓）登录了同一爱奇艺账号 且安装并开启不低于V6.0以上版本的爱奇艺客户端
部安卓（Android）设备，请点击进行选择
请您在手机端下载爱奇艺移动APP（仅支持安卓客户端）
使用微信扫一扫，下载爱奇艺移动APP
其他安装方式：手机浏览器输入短链接http://71.am/udn
下载安装包到本机：
爱奇艺云推送
请您在手机端登录爱奇艺移动APP（仅支持安卓客户端）
使用微信扫一扫，下载爱奇艺移动APP
180秒后更新
打开爱奇艺移动APP，点击“我的-扫一扫”，扫描左侧二维码进行登录
没有安装爱奇艺视频最新客户端？
开机就这样了，这是什么问题？里面大量资料。硬盘坏了，还是系统坏
正在检测客户端...
您尚未安装客户端，正在为您下载...安装完成后点击按钮即可下载
30秒后自动关闭
开机就这样了，这是什么问题？里面大量资料。硬盘坏了，还是系统坏">开机就这样了，这是什么问题？里面大量资料。硬盘坏了，还是系统坏
请选择打赏金额：
播放量12.7万
播放量数据：快去看看谁在和你一起看视频吧~
更多数据：
Copyright (C) 2018 & All Rights Reserved
您使用浏览器不支持直接复制的功能，建议您使用Ctrl+C或右键全选进行地址复制
正在为您下载爱奇艺客户端安装后即可快速下载海量视频
正在为您下载爱奇艺客户端安装后即可免费观看1080P视频
&li data-elem="tabtitle" data-seq="{{seq}}"& &a href="javascript:void(0);"& &span>{{start}}-{{end}}&/span& &/a& &/li&
&li data-downloadSelect-elem="item" data-downloadSelect-selected="false" data-downloadSelect-tvid="{{tvid}}"& &a href="javascript:void(0);"&{{pd}}&/a&
选择您要下载的《
色情低俗内容
血腥暴力内容
广告或欺诈内容
侵犯了我的权力
还可以输入
您使用浏览器不支持直接复制的功能，建议您使用Ctrl+C或右键全选进行地址复制请完成以下验证码
查看: 18302|回复: 11
开机进入桌面硬盘灯一直亮，持续5分钟，求解
本帖最后由 djkcsw 于
20:05 编辑
每天第一次开机进入桌面硬盘灯一直亮，不知道在读写什么，好像是system在最大量读写。cpu，内存占用一切正常，我开机启动项只有2个都是eav的，这种状况持续5分钟，期间干什么都很卡，动不了。5分钟过后，硬盘灯灭了，就正常了。重启和关机再打开都不会出现这种情况。难道是天气冷了，就会这样？跟温度有关系么?求解决
和电脑所处的温度还是有点关系的
把eva计划任务里的开机和登录检查去掉
感谢支持，欢迎常来： ）
开机后系统正在后台加载应用程序，可以尝试把没用的应用程序关闭如果win7看看
感谢支持，欢迎常来： ）
会不会是硬盘有坏扇区，所以不停地读啊读，最后终于勉强读过去了…………
giga2008 发表于
会不会是硬盘有坏扇区，所以不停地读啊读，最后终于勉强读过去了…………
怎么检查是否有坏扇区？
HD Tune 就可以呀
giga2008 发表于
HD Tune 就可以呀
hd健康检查全部都是正常
有可能是4KB扇区未对齐的问题哦~
解决方法见下链接：
感谢支持，欢迎常来： ）
saibanzhizun
严重同意3楼说法
Copyright & KaFan &KaFan.cn All Rights Reserved.
Powered by Discuz! X3.4( 苏ICP备号 ) GMT+8,我的笔记本电脑开机慢死了要5分钟才能看到桌面。然后还要等好几分钟才能上QQ开网站什么的，怎么回事啊_百度知道
我的笔记本电脑开机慢死了要5分钟才能看到桌面。然后还要等好几分钟才能上QQ开网站什么的，怎么回事啊
我有更好的答案
1)系统垃圾文件过多.
2)统默认30秒开机等待时间：打开金山卫士中的系统优化工具，选择开机加速选项，不行再问我。第三步.
3)电脑硬件需要更新，如内存、硬盘等.
4)影响开机速度开机启动项文件过多，需要重新排列系.电脑开机慢的解决办法：第一步：下载金山卫士第二步，建议使用金山卫士的一键优化功能对电脑进行开机速度优化。&按照我的方法操作解决问题：通过开机加速功能，用户可以选择一键优化，也可以按照自己的需求分别在启动项、服务项、计划任务进行优化。如果您对电脑系统不是很了解&电脑开机慢的原因
采纳率：40%
中病毒了吧 杀毒软件查杀下 不行就只能重装系统了 也有可能是垃圾多了 清理下垃圾！
1是配置过低，2是系统有问题 重新搞一下系统看看。
清清垃圾文件什么的，做做磁盘文件碎片整理。。。还有，，小心你的硬盘。。没准快挂了。。有资料赶紧备份。
我前面也这样，开个机子要8分钟，重新装了个windows7就好了，现在也就40几秒的开机时间
1是你开机加载的东西太多 想迅雷
等东西一开机他们也再开机的范围中
有下360或金山 开机加速
把这些东西关了2是你的电脑中病毒了系统主板的问题那个你考虑去电脑店按系统或是检查下电脑
其他3条回答
为您推荐：
其他类似问题
笔记本电脑的相关知识
换一换
回答问题，赢新手礼包
个人、企业类
违法有害信息,请在下方选择后提交
色情、暴力
我们会通过消息、邮箱等方式尽快将举报结果通知您。[疑惑]换了硬盘后，每次都要5分钟的检测时间 - 查看主题 & Ubuntu中文论坛
&[ 11 篇帖子 ]&
&文章标题 : [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
不知道是否应该发到菜鸟区：最近把电脑的320g换成了500g，不同牌子的笔记本硬盘。以前在旧硬盘里面是win7+10.04的双系统，半点问题都没有，但是自从换了硬盘之后，同样的步骤先安装win7再在扩展分区画出一部分空间出来转成ext4来装ubuntu，但是我发觉每次启动ubuntu都要5分钟的检测时间，期间硬盘灯常亮。重装n次win7和ubuntu之后，还是发现同样的情况，有时候会一闪而过什么 read error之类的，然后就会正常进入ubuntu登陆画面。还有一个状况就是，用liveCD进入安装画面时候也是出现这种情况，要自检好久才能进入安装的选择画面。google之后没找到什么类似的情况呀，所以来到这里求助，麻烦大家了。小弟虽说用ubuntu挺久了，但是都是已经有人调试好了的，平时自己编译点小程序什么的，从未这样折腾过，没见过这阵仗。
不知道需要提供什么信息呢？
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
18:14帖子: 626地址: 常德--重庆
送出感谢: 0 次
接收感谢: 0 次
关掉启动画面，看启动信息。
_________________ABIT Rocket AV8 ，AMD3500，创见DDR433 1GB，希捷IDE250GB，MSI6200a，7130电视卡，Archlinux
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
davidlone 写道:关掉启动画面，看启动信息。还没到紫色的ubuntu启动画面，长时间停留在黑色的画面什么都没有，只有一个光标在那里跳，硬盘灯长亮。
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
代码:[ 269.; ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen[ 269.; ata1.00: failed command: WRITE FPDMA QUEUED[ 269.; ata1.00: cmd 61/60:00:a8:59:18/00:/40 tag 0 ncq 49152 out[ 269.;& & & & & & & & res 40/00:08:c0:6c:15/00:00:35:00:00/40 Emask 0x4 (timeout)[ 269.; ata1.00: status: { DRDY }...后面还有类似的 READ FPDMA QUEUED，太长了...麻烦各位了
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
唉，换了Fedora13还是这样，难道真的是硬盘有坏道？但是win7下又检不出。还是up一下吧。再次麻烦各位，我还是不死心，一定会有一个原因的，google几天了。代码:usb 2-4: new high speed USB device using ehci_hcd and address 3ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ATA-8: Hitachi HTSA300, PB4OC64G, max UDMA/133ata1.00:
sectors, multi 0: LBA48 NCQ (depth 31/32), AAata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133scsi 0:0:0:0: Direct-Access& & &ATA& & & Hitachi HTS54505 PB4O PQ: 0 ANSI: 5sd 0:0:0:0: Attached scsi generic sg0 type 0sd 0:0:0:0: [sda] 2-byte logical blocks: (500 GB/465 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA&sda: sda1 sda2 sda3 & sda5 sda6 sda7 sda8usb 2-4: New USB device found, idVendor=0bda, idProduct=0158usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-4: Product: USB2.0-CRWusb 2-4: Manufacturer: Genericusb 2-4: SerialNumber: 00000&sda9 &sd 0:0:0:0: [sda] Attached SCSI diskusb 2-5: new high speed USB device using ehci_hcd and address 4usb 2-5: New USB device found, idVendor=064e, idProduct=c108usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-5: Product: Webcam-101usb 2-5: Manufacturer: Suyin Optronicsusb 2-5: SerialNumber: CN0316-MM00-OV03-VH-R61.01.00usb 5-1: new full speed USB device using uhci_hcd and address 2usb 5-1: New USB device found, idVendor=045e, idProduct=0745usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 5-1: Product: Microsoft(R) Nano Transceiver v1.0usb 5-1: Manufacturer: Microsoftinput: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.0/input/input6generic-usb 45.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input0input: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.1/input/input7generic-usb 45.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input1input: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.2/input/input8generic-usb 45.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input2ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ATAPI: Optiarc DVD RW AD-7581S, 4H03, max UDMA/100ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: configured for UDMA/100scsi 4:0:0:0: CD-ROM& & & & & & Optiarc& DVD RW AD-7581S& 4H03 PQ: 0 ANSI: 5sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:0:0: Attached scsi CD-ROM sr0sr 4:0:0:0: Attached scsi generic sg1 type 5Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd000/0xa0000input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9ata6: SATA link down (SStatus 0 SControl 300)Freeing unused kernel memory: 468k freedWrite protecting the kernel text: 3544kWrite protecting the kernel read-only data: 1740kdracut: dracut-005-3.fc13dracut: rd_NO_LUKS: removing cryptoluks activationudev: starting version 151[Firmware Bug]: ACPI: ACPI brightness control misses _BQC functionacpi device:06: registered as cooling_device3input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input10ACPI: Video Device [EVGA] (multi-head: yes& rom: no& post: no)
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
18:14帖子: 626地址: 常德--重庆
送出感谢: 0 次
接收感谢: 0 次
lz不妨把笔记本型号和硬盘型号说一下，系统还可以进吗？可以的话进去后把dmesg和lspci -k命令的结果贴出来看一下。下面链接里面的情况好像和你的有点类似，好像是bug。你可以试试下面的方法：进入系统，升级系统内核到最新版本看看情况如何。或者进入bios里面把ahci或者是ncq之类的功能关掉再看看。
_________________ABIT Rocket AV8 ，AMD3500，创见DDR433 1GB，希捷IDE250GB，MSI6200a，7130电视卡，Archlinux
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
davidlone 写道:lz不妨把笔记本型号和硬盘型号说一下，系统还可以进吗？可以的话进去后把dmesg和lspci -k命令的结果贴出来看一下。下面链接里面的情况好像和你的有点类似，好像是bug。你可以试试下面的方法：进入系统，升级系统内核到最新版本看看情况如何。或者进入bios里面把ahci或者是ncq之类的功能关掉再看看。谢谢，上面的就是dmesg的一部分结果。完整结果： 代码:Initializing cgroup subsys cpusetInitializing cgroup subsys cpuLinux version 2.6.33.6-147.2.4.fc13.i686 (mockbuild@x86-20.phx2.fedoraproject.org) (gcc version 4.4.4
(Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Jul 23 17:27:40 UTC 2010BIOS-provided physical RAM map:&BIOS-e820: 0000 - e000 (usable)&BIOS-e820: e000 - a0000 (reserved)&BIOS-e820: e0000 - 0000 (reserved)&BIOS-e820: 0000 - fc6b000 (usable)&BIOS-e820: fc6b000 - fcbf000 (reserved)&BIOS-e820: fcbf000 - fd83000 (usable)&BIOS-e820: fd83000 - fdbf000 (ACPI NVS)&BIOS-e820: fdbf000 - fde0000 (usable)&BIOS-e820: fde0000 - fdf7000 (ACPI data)&BIOS-e820: fdf7000 - fe00000 (usable)&BIOS-e820: fe00000 - 0000 (reserved)&BIOS-e820: 0000 - 0000 (reserved)&BIOS-e820: fec00000 - fec01000 (reserved)&BIOS-e820: fed10000 - fed14000 (reserved)&BIOS-e820: fed18000 - fed1a000 (reserved)&BIOS-e820: fed1c000 - fed20000 (reserved)&BIOS-e820: fee00000 - fee01000 (reserved)&BIOS-e820: fff00000 - 0000 (reserved)Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!DMI 2.4 present.last_pfn = 0x7fe00 max_arch_pfn = 0x100000MTRR default type: uncachableMTRR fixed ranges enabled:& 00000-9FFFF write-back& A0000-BFFFF uncachable& C0000-EFFFF write-through& F0000-FFFFF write-combiningMTRR variable ranges enabled:& 0 base
mask FC0000000 write-back& 1 base 0FFF00000 mask FFFF00000 write-protect& 2 base
mask FC0000000 write-back& 3 base 07FE00000 mask FFFE00000 uncachable& 4 disabled& 5 disabled& 6 disabledx86 PAT enabled: cpu 0, old 0x6, new 0x6initial memory mapped : 0 - init_memory_mapping: & -
page 4k& -
page 2M& - 0 page 4kkernel direct mapping tables up to 373fe000 @ RAMDISK: 374e8000 - 37fef592Allocated new RAMDISK: 00b01000 - Move RAMDISK from e8000 - fef591 to 00b01000 - ACPI: RSDP 000fe020 00024 (v02 HPQOEM)ACPI: XSDT 7fdf (v01 HPQOEM SLIC-MPC & & & )ACPI: FACP 7fdf (v04 HPQOEM SLIC-MPC
MSFT )ACPI: DSDT 7fde (v01 HPQOEM SLIC-MPC
MSFT )ACPI: FACS 7fd8c000 00040ACPI: DMAR 7fdf (v01& & & & & & & &? & & & )ACPI: SSDT 7fdf (v01& PmRef& & CpuPm
INTL )ACPI: HPET 7fdf (v01 HPQOEM SLIC-MPC
MSFT )ACPI: APIC 7fdf (v02 HPQOEM SLIC-MPC
MSFT )ACPI: MCFG 7fdfC (v01 HPQOEM SLIC-MPC
MSFT )ACPI: ASF! 7fdef000 000A5 (v32 HPQOEM SLIC-MPC
MSFT )ACPI: SLIC 7fde (v01 HPQOEM SLIC-MPC
LOHR 000F4240)ACPI: BOOT 7fde (v01 HPQOEM SLIC-MPC
MSFT )ACPI: SSDT 7fde (v01 INTEL& SataAhci
INTL )ACPI: Local APIC address 0xfee000001162MB HIGHMEM available.883MB LOWMEM available.& mapped low ram: 0 - 373fe000& low ram: 0 - 373fe000& node 0 low ram:
- 373fe000& node 0 bootmap
- 00010e80(10 early reservations) ==& bootmem [ - 0]& #0 [ - ]& &BIOS data page ==& [ - ]& #1 [ - ]& & EX TRAMPOLINE ==& [ - ]& #2 [ - 0000afbff4]& & TEXT DATA BSS ==& [ - 0000afbff4]& #3 [ - ]& & BIOS reserved ==& [ - ]& #4 [0000afc000 - ac]& & & & & & & BRK ==& [0000afc000 - ac]& #5 [ - ]& & & &TRAMPOLINE ==& [ - ]& #6 [ - ]& & & ACPI WAKEUP ==& [ - ]& #7 [ - ]& & & & & PGTABLE ==& [ - ]& #8 [ - ]& & & NEW RAMDISK ==& [ - ]& #9 [ - ]& & & & & BOOTMAP ==& [ - ]Zone PFN ranges:& DMA& & & 0x -& 0x& Normal& &0x -& 0x000373fe& HighMem& 0x000373fe -& 0x0007fe00Movable zone start PFN for each nodeearly_node_map[5] active PFN ranges& & 0: 0x -& 0x0000009e& & 0: 0x -& 0x0007fc6b& & 0: 0x0007fcbf -& 0x0007fd83& & 0: 0x0007fdbf -& 0x0007fde0& & 0: 0x0007fdf7 -& 0x0007fe00On node 0 totalpages: 523511free_area_init_node: node 0, pgdat c0995480, node_mem_map c160a000& DMA zone: 32 pages used for memmap& DMA zone: 0 pages reserved& DMA zone: 3966 pages, LIFO batch:0& Normal zone: 1736 pages used for memmap& Normal zone: 220470 pages, LIFO batch:31& HighMem zone: 2325 pages used for memmap& HighMem zone: 294982 pages, LIFO batch:31Using APIC driver defaultACPI: PM-Timer IO Port: 0x408ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Using ACPI (MADT) for SMP configuration informationACPI: HPET id: 0x base: 0xfed00000SMP: Allowing 4 CPUs, 2 hotplug CPUsnr_irqs_gsi: 24PM: Registered nosave memory: e000 - a0000PM: Registered nosave memory: a0000 - e0000PM: Registered nosave memory: e0000 - 0000Allocating PCI resources starting at
(gap: 00000)Booting paravirtualized kernel on bare hardwaresetup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1PERCPU: Embedded 14 pages/cpu @c648 r0 d26pcpu-alloc: s3696 u1048576 alloc=1*4194304pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on.& Total pages: 519418Kernel command line: ro root=/dev/mapper/vg_suzlaptop-lv_root rd_LVM_LV=vg_suzlaptop/lv_root rd_LVM_LV=vg_suzlaptop/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM intel_iommu=off LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quietIntel-IOMMU: disabledPID hash table entries: 4096 (order: 2, 16384 bytes)Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240allocated
bytes of page_cgroupplease try 'cgroup_disable=memory' option if you don't want memory cgroupsInitializing HighMem for node 0 (000373fe:0007fe00)Memory: 95104k available (3542k kernel code, 46188k reserved, 2307k data, 468k init, 1189228k highmem)virtual kernel memory layout:& & fixmap& : 0xffad5000 - 0xfffff000& &(5288 kB)& & pkmap& &: 0xff400000 - 0xff800000& &(4096 kB)& & vmalloc : 0xf7bfe000 - 0xff3fe000& &( 120 MB)& & lowmem& : 0xc0000000 - 0xf73fe000& &( 883 MB)& & & .init : 0xc09b7000 - 0xc0a2c000& &( 468 kB)& & & .data : 0xc0775a08 - 0xc09b67a0& &(2307 kB)& & & .text : 0xc0400000 - 0xc0775a08& &(3542 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1Hierarchical RCU implementation.NR_IRQS:1280Console: colour VGA+ 80x25console [tty0] enabledhpet clockevent registeredFast TSC calibration using PITDetected
MHz processor.Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.96 BogoMIPS (lpj=2393981)Security Framework initializedSELinux:& Initializing.SELinux:& Starting in permissive modeMount-cache hash table entries: 512Initializing cgroup subsys nsInitializing cgroup subsys cpuacctInitializing cgroup subsys memoryInitializing cgroup subsys devicesInitializing cgroup subsys freezerInitializing cgroup subsys net_clsInitializing cgroup subsys blkioCPU: Physical Processor ID: 0CPU: Processor Core ID: 0mce: CPU supports 6 MCE banksCPU0: Thermal monitoring enabled (TM1)using mwait in idle threads.Performance Events: Core2 events, Intel PMU driver.... version:& & & & & & & & 2... bit width:& & & & & & & 40... generic registers:& & & 2... value mask:& & & & & & &000000ffffffffff... max period:& & & & & & &fffffff... fixed-purpose events:& &3... event mask:& & & & & & &0003Checking 'hlt' instruction... OK.ACPI: Core revision DMAR: Host address width 36DMAR: DRHD base: 0x000000feb03000 flags: 0x0IOMMU feb03000: ver 1:0 cap c60 ecap 1000DMAR: DRHD base: 0x000000feb02000 flags: 0x1IOMMU feb02000: ver 1:0 cap c0 ecap 1000DMAR: No RMRR foundDMAR: No ATSR foundEnabling APIC mode:& Flat.& Using 1 I/O APICs..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Intel(R) Core(TM)2 Duo CPU& & &P8600& @ 2.40GHz stepping 0aBooting Node& &0, Processors& #1Initializing CPU#1Brought up 2 CPUsTotal of 2 processors activated (9576.27 BogoMIPS).sizeof(vma)=84 bytessizeof(page)=32 bytessizeof(inode)=352 bytessizeof(dentry)=132 bytessizeof(ext3inode)=508 bytessizeof(buffer_head)=56 bytessizeof(skbuff)=184 bytessizeof(task_struct)=3252 bytesdevtmpfs: initializedregulator: core version 0.5Time:& 0:54:08& Date: 08/09/10NET: Registered protocol family 16ACPI: bus type pci registeredPCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xfxfbffffff] (base 0xf8000000)PCI: MMCONFIG at [mem 0xfxfbffffff] reserved in E820PCI: Using MMCONFIG for extended config spacePCI: Using configuration type 1 for base accessbio: create slab &bio-0& at 0ACPI: EC: Look up EC in DSDTACPI: Executed 1 blocks of module-level executable AML codeACPI: BIOS _OSI(Linux) query ignoredACPI: EC: GPE storm detected, transactions will use polling modeACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routing[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function[Firmware Bug]: ACPI: ACPI brightness control misses _BQC functionACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62ACPI: Power Resource [FN00] (on)ACPI: No dock devices found.ACPI: PCI Root Bridge [PCI0] (0000:00)pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with &pci=use_crs& to use thempci_root PNP0A08:00: host bridge window [io& 0xcf7] (ignored)pci_root PNP0A08:00: host bridge window [io& 0x0d00-0xffff] (ignored)pci_root PNP0A08:00: host bridge window [mem 0x000abffff] (ignored)pci_root PNP0A08:00: host bridge window [mem 0xxfebfffff] (ignored)DMAR: Forcing write-buffer flush capabilitypci .0: PME# supported from D0 D3hot D3coldpci .0: PME# disabledpci a.0: reg 20: [io& 0x60c0-0x60df]pci a.1: reg 20: [io& 0x60a0-0x60bf]pci a.7: reg 10: [mem 0x9b004c00-0x9b004fff]pci a.7: PME# supported from D0 D3hot D3coldpci a.7: PME# disabledpci b.0: reg 10: [mem 0x9bx9b003fff 64bit]pci b.0: PME# supported from D0 D3hot D3coldpci b.0: PME# disabledpci c.0: PME# supported from D0 D3hot D3coldpci c.0: PME# disabledpci c.2: PME# supported from D0 D3hot D3coldpci c.2: PME# disabledpci c.3: PME# supported from D0 D3hot D3coldpci c.3: PME# disabledpci c.5: PME# supported from D0 D3hot D3coldpci c.5: PME# disabledpci d.0: reg 20: [io& 0xf]pci d.1: reg 20: [io& 0xf]pci d.2: reg 20: [io& 0xf]pci d.7: reg 10: [mem 0x9bx9b004bff]pci d.7: PME# supported from D0 D3hot D3coldpci d.7: PME# disabledpci f.2: reg 10: [io& 0x60e8-0x60ef]pci f.2: reg 14: [io& 0x60f4-0x60f7]pci f.2: reg 18: [io& 0x60e0-0x60e7]pci f.2: reg 1c: [io& 0x60f0-0x60f3]pci f.2: reg 20: [io& 0xf]pci f.2: reg 24: [mem 0x9bx9b0047ff]pci f.2: PME# supported from D3hotpci f.2: PME# disabledpci f.3: reg 10: [mem 0x9bx9b0050ff 64bit]pci f.3: reg 20: [io& 0xf]pci .0: reg 10: [mem 0xx92ffffff]pci .0: reg 14: [mem 0xx8fffffff 64bit pref]pci .0: reg 1c: [mem 0xx91ffffff 64bit]pci .0: reg 24: [io& 0xf]pci .0: reg 30: [mem 0xfffe0000-0xffffffff pref]pci .0: PCI bridge to [bus 01-01]pci .0:& &bridge window [io& 0xfff]pci .0:& &bridge window [mem 0xx92ffffff]pci .0:& &bridge window [mem 0xx8fffffff 64bit pref]pci c.0: PCI bridge to [bus 02-02]pci c.0:& &bridge window [io& 0xfff]pci c.0:& &bridge window [mem 0x9ax9affffff]pci c.0:& &bridge window [mem 0xx93ffffff 64bit pref]pci .0: reg 10: [mem 0xx99001fff 64bit]pci .0: PME# supported from D0 D3hot D3coldpci .0: PME# disabledpci c.2: PCI bridge to [bus 03-03]pci c.2:& &bridge window [io& 0xfff]pci c.2:& &bridge window [mem 0xx99ffffff]pci c.2:& &bridge window [mem 0xx94ffffff 64bit pref]pci .0: reg 10: [io& 0xff]pci .0: reg 18: [mem 0xx95004fff 64bit pref]pci .0: reg 20: [mem 0xx95003fff 64bit pref]pci .0: reg 30: [mem 0xfffe0000-0xffffffff pref]pci .0: supports D1 D2pci .0: PME# supported from D0 D1 D2 D3hot D3coldpci .0: PME# disabledpci c.3: PCI bridge to [bus 04-04]pci c.3:& &bridge window [io& 0xfff]pci c.3:& &bridge window [mem 0xx98ffffff]pci c.3:& &bridge window [mem 0xx95ffffff 64bit pref]pci c.5: PCI bridge to [bus 05-07]pci c.5:& &bridge window [io& 0xfff]pci c.5:& &bridge window [mem 0xx97ffffff]pci c.5:& &bridge window [mem 0xx96ffffff 64bit pref]pci e.0: PCI bridge to [bus 08-08] (subtractive decode)pci_bus 0000:00: on NUMA node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.vgaarb: device added: PCI:.0,decodes=io+mem,owns=io+mem,locks=nonevgaarb: loadedSCSI subsystem initializedlibata version 3.00 loaded.usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbPCI: Using ACPI for IRQ routingPCI: pci_cache_line_size set to 64 bytesNetLabel: InitializingNetLabel:& domain hash size = 128NetLabel:& protocols = UNLABELED CIPSOv4NetLabel:& unlabeled traffic allowed by defaultHPET: 4 timers in total, 0 timers will be used for per-cpu timerhpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0hpet0: 4 comparators, 64-bit 14.318180 MHz counterSwitching to clocksource tscpnp: PnP ACPI initACPI: bus type pnp registeredpnp 00:01: disabling [io& 0x164e-0x164f] because it overlaps c.5 BAR 13 [io& 0xfff]pnp: PnP ACPI: found 11 devicesACPI: ACPI bus type pnp unregisteredsystem 00:01: [io& 0xf] has been reservedsystem 00:01: [io& 0x0610] has been reservedsystem 00:01: [io& 0xf] has been reservedsystem 00:01: [io& 0x7] has been reservedsystem 00:01: [io& 0x3] has been reservedsystem 00:01: [io& 0xf] has been reservedsystem 00:01: [io& 0xf] has been reservedsystem 00:01: [mem 0xfxfbffffff] has been reservedsystem 00:01: [mem 0xfed1c000-0xfed1ffff] has been reservedsystem 00:01: [mem 0xfed10000-0xfed13fff] has been reservedsystem 00:01: [mem 0xfed18000-0xfed18fff] has been reservedsystem 00:01: [mem 0xfed19000-0xfed19fff] has been reservedsystem 00:01: [mem 0xfec00000-0xfec00fff] could not be reservedsystem 00:01: [mem 0xfed20000-0xfed8ffff] has been reservedsystem 00:01: [mem 0xfee00000-0xfee00fff] has been reservedpci .0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]pci .0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]pci .0: BAR 6: can't assign mem pref (size 0x20000)pci .0: PCI bridge to [bus 01-01]pci .0:& &bridge window [io& 0xfff]pci .0:& &bridge window [mem 0xx92ffffff]pci .0:& &bridge window [mem 0xx8fffffff 64bit pref]pci c.0: PCI bridge to [bus 02-02]pci c.0:& &bridge window [io& 0xfff]pci c.0:& &bridge window [mem 0x9ax9affffff]pci c.0:& &bridge window [mem 0xx93ffffff 64bit pref]pci c.2: PCI bridge to [bus 03-03]pci c.2:& &bridge window [io& 0xfff]pci c.2:& &bridge window [mem 0xx99ffffff]pci c.2:& &bridge window [mem 0xx94ffffff 64bit pref]pci .0: BAR 6: assigned [mem 0xx9503ffff pref]pci c.3: PCI bridge to [bus 04-04]pci c.3:& &bridge window [io& 0xfff]pci c.3:& &bridge window [mem 0xx98ffffff]pci c.3:& &bridge window [mem 0xx95ffffff 64bit pref]pci c.5: PCI bridge to [bus 05-07]pci c.5:& &bridge window [io& 0xfff]pci c.5:& &bridge window [mem 0xx97ffffff]pci c.5:& &bridge window [mem 0xx96ffffff 64bit pref]pci e.0: PCI bridge to [bus 08-08]pci e.0:& &bridge window [io& disabled]pci e.0:& &bridge window [mem disabled]pci e.0:& &bridge window [mem pref disabled]pci .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16pci .0: setting latency timer to 64pci c.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16pci c.0: setting latency timer to 64pci c.2: PCI INT C -& GSI 18 (level, low) -& IRQ 18pci c.2: setting latency timer to 64pci c.3: PCI INT D -& GSI 19 (level, low) -& IRQ 19pci c.3: setting latency timer to 64pci c.5: PCI INT B -& GSI 17 (level, low) -& IRQ 17pci c.5: setting latency timer to 64pci e.0: setting latency timer to 64pci_bus 0000:00: resource 0 [io& 0x0000-0xffff]pci_bus 0000:00: resource 1 [mem 0xxffffffff]pci_bus 0000:01: resource 0 [io& 0xfff]pci_bus 0000:01: resource 1 [mem 0xx92ffffff]pci_bus 0000:01: resource 2 [mem 0xx8fffffff 64bit pref]pci_bus 0000:02: resource 0 [io& 0xfff]pci_bus 0000:02: resource 1 [mem 0x9ax9affffff]pci_bus 0000:02: resource 2 [mem 0xx93ffffff 64bit pref]pci_bus 0000:03: resource 0 [io& 0xfff]pci_bus 0000:03: resource 1 [mem 0xx99ffffff]pci_bus 0000:03: resource 2 [mem 0xx94ffffff 64bit pref]pci_bus 0000:04: resource 0 [io& 0xfff]pci_bus 0000:04: resource 1 [mem 0xx98ffffff]pci_bus 0000:04: resource 2 [mem 0xx95ffffff 64bit pref]pci_bus 0000:05: resource 0 [io& 0xfff]pci_bus 0000:05: resource 1 [mem 0xx97ffffff]pci_bus 0000:05: resource 2 [mem 0xx96ffffff 64bit pref]pci_bus 0000:08: resource 3 [io& 0x0000-0xffff]pci_bus 0000:08: resource 4 [mem 0xxffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredUDP hash table entries: 512 (order: 2, 16384 bytes)UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)NET: Registered protocol family 1pci .0: Boot video devicePCI: CLS 64 bytes, default 64Trying to unpack rootfs image as initramfs...Freeing initrd memory: 11293k freedSimple Boot Flag value 0x5 read from CMOS RAM was invalidSimple Boot Flag at 0x44 set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(.334:1): initializedhighmem bounce pool size: 64 pagesHugeTLB registered 4 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.2Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)msgmni has been set to 1699SELinux:& Registering netfilter hooksalg: No test for stdrng (krng)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)io scheduler noop registeredio scheduler deadline registeredio scheduler cfq registered (default)pcieport .0: setting latency timer to 64pcieport .0: irq 24 for MSI/MSI-Xpcieport c.0: setting latency timer to 64pcieport c.0: irq 25 for MSI/MSI-Xpcieport c.2: setting latency timer to 64pcieport c.2: irq 26 for MSI/MSI-Xpcieport c.3: setting latency timer to 64pcieport c.3: irq 27 for MSI/MSI-Xpcieport c.5: setting latency timer to 64pcieport c.5: irq 28 for MSI/MSI-Xpci_hotplug: PCI Hot Plug PCI Core version: 0.5pciehp: PCI Express Hot Plug Controller Driver version: 0.4acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5acpiphp: Slot [1] registeredpci-stub: invalid id string &&ACPI: AC Adapter [AC] (on-line)input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0ACPI: Power Button [PWRB]input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1ACPI: Lid Switch [LID0]input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2ACPI: Sleep Button [SLPB]input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3ACPI: Power Button [PWRF]ACPI: Fan [FAN] (on)ACPI: SSDT 7fc6ec18 00265 (v01& PmRef& Cpu0Ist
INTL )ACPI: SSDT 7fc6c618 005B3 (v01& PmRef& Cpu0Cst
INTL )Monitor-Mwait will be used to enter C-1 stateMonitor-Mwait will be used to enter C-2 stateMonitor-Mwait will be used to enter C-3 stateMarking TSC unstable due to TSC halts in idleSwitching to clocksource hpetACPI: SSDT 7fc6de18 001CF (v01& PmRef& & ApIst
INTL )ACPI: SSDT 7fc6ef18 0008D (v01& PmRef& & ApCst
INTL )thermal LNXTHERM:01: registered as thermal_zone0ACPI: Thermal Zone [THRM] (42 C)isapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundNon-volatile memory driver v1.3Linux agpgart interface v0.103Serial:
driver, 4 ports, IRQ sharing enabledbrd: module loadedloop: module loadedinput: Macintosh mouse button emulation as /devices/virtual/input/input4ahci f.2: version 3.0ahci f.2: PCI INT B -& GSI 21 (level, low) -& IRQ 21ahci f.2: irq 29 for MSI/MSI-Xahci: SSS flag set, parallel bus scan disabledahci f.2: AHCI
slots 4 ports 3 Gbps 0x31 impl SATA modeahci f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci f.2: setting latency timer to 64scsi0 : ahciscsi1 : ahciscsi2 : ahciscsi3 : ahciscsi4 : ahciscsi5 : ahciata1: SATA max UDMA/133 abar mb004000 port 0x9b004100 irq 29ata2: DUMMYata3: DUMMYata4: DUMMYata5: SATA max UDMA/133 irq_stat 0x, connection status changed irq 29ata6: SATA max UDMA/133 abar mb004000 port 0x9b004380 irq 29Fixed MDIO Bus: probedehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci_hcd a.7: PCI INT C -& GSI 18 (level, low) -& IRQ 18ehci_hcd a.7: setting latency timer to 64ehci_hcd a.7: EHCI Host Controllerehci_hcd a.7: new USB bus registered, assigned bus number 1ehci_hcd a.7: debug port 1ehci_hcd a.7: cache line size of 64 is not supportedehci_hcd a.7: irq 18, io mem 0x9b004c00ehci_hcd a.7: USB 2.0 started, EHCI 1.00usb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 ehci_hcdusb usb1: SerialNumber: a.7hub 1-0:1.0: USB hub foundhub 1-0:1.0: 4 ports detectedehci_hcd d.7: PCI INT A -& GSI 20 (level, low) -& IRQ 20ehci_hcd d.7: setting latency timer to 64ehci_hcd d.7: EHCI Host Controllerehci_hcd d.7: new USB bus registered, assigned bus number 2ehci_hcd d.7: debug port 1ehci_hcd d.7: cache line size of 64 is not supportedehci_hcd d.7: irq 20, io mem 0x9b004800ehci_hcd d.7: USB 2.0 started, EHCI 1.00usb usb2: New USB device found, idVendor=1d6b, idProduct=0002usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: EHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 ehci_hcdusb usb2: SerialNumber: d.7hub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driveruhci_hcd: USB Universal Host Controller Interface driveruhci_hcd a.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16uhci_hcd a.0: setting latency timer to 64uhci_hcd a.0: UHCI Host Controlleruhci_hcd a.0: new USB bus registered, assigned bus number 3uhci_hcd a.0: irq 16, io base 0xusb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: UHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 uhci_hcdusb usb3: SerialNumber: a.0hub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detecteduhci_hcd a.1: PCI INT B -& GSI 17 (level, low) -& IRQ 17uhci_hcd a.1: setting latency timer to 64uhci_hcd a.1: UHCI Host Controlleruhci_hcd a.1: new USB bus registered, assigned bus number 4uhci_hcd a.1: irq 17, io base 0xusb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: UHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 uhci_hcdusb usb4: SerialNumber: a.1hub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detecteduhci_hcd d.0: PCI INT A -& GSI 20 (level, low) -& IRQ 20uhci_hcd d.0: setting latency timer to 64uhci_hcd d.0: UHCI Host Controlleruhci_hcd d.0: new USB bus registered, assigned bus number 5uhci_hcd d.0: irq 20, io base 0xusb usb5: New USB device found, idVendor=1d6b, idProduct=0001usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: UHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 uhci_hcdusb usb5: SerialNumber: d.0hub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detecteduhci_hcd d.1: PCI INT B -& GSI 22 (level, low) -& IRQ 22uhci_hcd d.1: setting latency timer to 64uhci_hcd d.1: UHCI Host Controlleruhci_hcd d.1: new USB bus registered, assigned bus number 6uhci_hcd d.1: irq 22, io base 0xusb usb6: New USB device found, idVendor=1d6b, idProduct=0001usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb6: Product: UHCI Host Controllerusb usb6: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 uhci_hcdusb usb6: SerialNumber: d.1hub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detecteduhci_hcd d.2: PCI INT C -& GSI 18 (level, low) -& IRQ 18uhci_hcd d.2: setting latency timer to 64uhci_hcd d.2: UHCI Host Controlleruhci_hcd d.2: new USB bus registered, assigned bus number 7uhci_hcd d.2: irq 18, io base 0xusb usb7: New USB device found, idVendor=1d6b, idProduct=0001usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb7: Product: UHCI Host Controllerusb usb7: Manufacturer: Linux 2.6.33.6-147.2.4.fc13.i686 uhci_hcdusb usb7: SerialNumber: d.2hub 7-0:1.0: USB hub foundhub 7-0:1.0: 2 ports detectedPNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micertc_cmos 00:03: RTC can wake from S4rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, 242 bytes nvram, hpet irqsdevice-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.17.0-ioctl () initialised: dm-cpuidle: using governor laddercpuidle: using governor menuusbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhidusbhid: USB HID core drivernf_conntrack version 0.5.0 (16384 buckets, 65536 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please usenf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option orsysctl net.netfilter.nf_conntrack_acct=1 to enable it.ip_tables: (C)
Netfilter Core TeamTCP cubic registeredInitializing XFRM netlink socketNET: Registered protocol family 17Using IPI No-Shortcut modePM: Resume from disk failed.registered taskstats version 1No TPM chip found, activating TPM-bypass!& Magic number: 6:574:910rtc_cmos 00:03: setting system clock to
00:54:10 UTC ()Initalizing network drop monitor serviceinput: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5ACPI: Battery Slot [BAT0] (battery present)usb 2-4: new high speed USB device using ehci_hcd and address 3ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ATA-8: Hitachi HTSA300, PB4OC64G, max UDMA/133ata1.00:
sectors, multi 0: LBA48 NCQ (depth 31/32), AAata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133scsi 0:0:0:0: Direct-Access& & &ATA& & & Hitachi HTS54505 PB4O PQ: 0 ANSI: 5sd 0:0:0:0: Attached scsi generic sg0 type 0sd 0:0:0:0: [sda] 2-byte logical blocks: (500 GB/465 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA&sda: sda1 sda2 sda3 & sda5 sda6 sda7 sda8usb 2-4: New USB device found, idVendor=0bda, idProduct=0158usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-4: Product: USB2.0-CRWusb 2-4: Manufacturer: Genericusb 2-4: SerialNumber: 00000&sda9 &sd 0:0:0:0: [sda] Attached SCSI diskusb 2-5: new high speed USB device using ehci_hcd and address 4usb 2-5: New USB device found, idVendor=064e, idProduct=c108usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-5: Product: Webcam-101usb 2-5: Manufacturer: Suyin Optronicsusb 2-5: SerialNumber: CN0316-MM00-OV03-VH-R61.01.00usb 5-1: new full speed USB device using uhci_hcd and address 2usb 5-1: New USB device found, idVendor=045e, idProduct=0745usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 5-1: Product: Microsoft(R) Nano Transceiver v1.0usb 5-1: Manufacturer: Microsoftinput: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.0/input/input6generic-usb 45.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input0input: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.1/input/input7generic-usb 45.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input1input: Microsoft Microsoft(R) Nano Transceiver v1.0 as /devices/pci0:00:1d.0/usb5/5-1/5-1:1.2/input/input8generic-usb 45.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft(R) Nano Transceiver v1.0] on usb-d.0-1/input2ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ATAPI: Optiarc DVD RW AD-7581S, 4H03, max UDMA/100ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata5.00: configured for UDMA/100scsi 4:0:0:0: CD-ROM& & & & & & Optiarc& DVD RW AD-7581S& 4H03 PQ: 0 ANSI: 5sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:0:0: Attached scsi CD-ROM sr0sr 4:0:0:0: Attached scsi generic sg1 type 5Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd000/0xa0000ata6: SATA link down (SStatus 0 SControl 300)Freeing unused kernel memory: 468k freedWrite protecting the kernel text: 3544kWrite protecting the kernel read-only data: 1740kinput: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9dracut: dracut-005-3.fc13dracut: rd_NO_LUKS: removing cryptoluks activationudev: starting version 151[Firmware Bug]: ACPI: ACPI brightness control misses _BQC functionacpi device:06: registered as cooling_device3input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input10ACPI: Video Device [EVGA] (multi-head: yes& rom: no& post: no)[drm] Initialized drm 1.1.0 nouveau .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16nouveau .0: setting latency timer to 64[drm] nouveau .0: Detected an NV50 generation card (0x)[drm] nouveau .0: Attempting to load BIOS image from PRAMIN[drm] nouveau .0: ... appears to be valid[drm] nouveau .0: BIT BIOS found[drm] nouveau .0: Bios version 62.98.5a.00[drm] nouveau .0: TMDS table revision 2.0 not currently supported[drm] nouveau .0: Found Display Configuration Block version 4.0[drm] nouveau .0: Raw DCB entry 0: 10034[drm] nouveau .0: Raw DCB entry 1: 00028[drm] nouveau .0: Raw DCB entry 2: 20010[drm] nouveau .0: Raw DCB entry 3: 000000[drm] nouveau .0: DCB connector table: VHER 0x40 5 16 4[drm] nouveau .0:& &0: 0x: type 0x40 idx 0 tag 0xff[drm] nouveau .0:& &1: 0x: type 0x00 idx 1 tag 0xff[drm] nouveau .0:& &2: 0x: type 0x61 idx 2 tag 0x07[drm] nouveau .0: Parsing VBIOS init table 0 at offset 0xDAD1[drm] nouveau .0: Parsing VBIOS init table 1 at offset 0xDEC9[drm] nouveau .0: Parsing VBIOS init table 2 at offset 0xE78C[drm] nouveau .0: Parsing VBIOS init table 3 at offset 0xE85A[drm] nouveau .0: Parsing VBIOS init table 4 at offset 0xEB10[drm] nouveau .0: Parsing VBIOS init table at offset 0xEB75[drm] nouveau .0: 0xEB75: Condition still not met after 20ms, skipping following opcodes[drm] nouveau .0: Couldn't find matching output script table[drm] nouveau .0: 0xC992: parsing output script 0[drm] nouveau .0: Detected 512MiB VRAM[TTM] Zone& kernel: Available graphics memory: 435194 kiB.[TTM] Zone highmem: Available graphics memory: 1029808 kiB.[ttm] Initializing pool allocator.[drm] nouveau .0: 512 MiB GART (aperture)[drm] nouveau .0: Allocating FIFO number 1[drm] nouveau .0: nouveau_channel_alloc: initialised FIFO 1[drm] nouveau .0: allocated
fb: 0x, bo f67f6600fbcon: nouveaufb (fb0) is primary deviceConsole: switching to colour frame buffer device 170x48[drm] nouveau .0: Couldn't find matching output script tablefb0: nouveaufb frame buffer deviceregistered panic notifier[drm] nouveau .0: Couldn't find matching output script table[drm] nouveau .0: Couldn't find matching output script table[drm] Initialized nouveau 0.0.16
for .0 on minor 0dracut: Starting plymouth daemon[drm] nouveau .0: Couldn't find matching output script tabledracut: rd_NO_DM: removing DM RAID activationdracut: rd_NO_MD: removing MD RAID activationInitializing USB Mass Storage driver...scsi6 : usb-storage 2-4:1.0usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.scsi 6:0:0:0: Direct-Access& & &Generic- Multi-Card& & & &1.00 PQ: 0 ANSI: 0 CCSsd 6:0:0:0: Attached scsi generic sg2 type 0sd 6:0:0:0: [sdb] Attached SCSI removable diskata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozenata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/08:00:20:90:f5/00:00:19:00:00/40 tag 0 ncq 4096 in& & & & &res 40/00:08:00:30:05/00:00:1a:00:00/40 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/08:08:0c:32:03/00:00:00:00:00/40 tag 1 ncq 4096 in& & & & &res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/08:10:00:0a:00/00:00:00:00:00/40 tag 2 ncq 4096 in& & & & &res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1: hard resetting linkata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133ata1.00: device reported invalid CHS sector 0ata1.00: device reported invalid CHS sector 0ata1.00: device reported invalid CHS sector 0ata1: EH completedracut: Scanning devices sda9& for LVM logical volumes vg_suzlaptop/lv_root vg_suzlaptop/lv_swap dracut: inactive '/dev/vg_suzlaptop/lv_root' [44.38 GiB] inheritdracut: inactive '/dev/vg_suzlaptop/lv_swap' [3.94 GiB] inheritEXT4-fs (dm-0): mounted filesystem with ordered data modedracut: Mounted root filesystem /dev/mapper/vg_suzlaptop-lv_rootdracut: Loading SELinux policyata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozenata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/d0:00:18:c8:5c/00:00:1a:00:00/40 tag 0 ncq 106496 in& & & & &res 40/00:08:00:30:05/00:00:1a:00:00/40 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1: hard resetting linkata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133ata1.00: device reported invalid CHS sector 0ata1: EH completeSELinux:& Disabled at runtime.SELinux:& Unregistering netfilter hookstype=1404 audit(.955:2): selinux=0 auid= ses=dracut: /sbin/load_policy: 无法加载策略： 没有那个文件或目录dracut: Switching rootata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozenata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/00:00:80:68:05/01:00:1a:00:00/40 tag 0 ncq 131072 in& & & & &res 40/00:08:00:30:05/00:00:1a:00:00/40 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/08:08:80:6d:05/01:00:1a:00:00/40 tag 1 ncq 135168 in& & & & &res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1: hard resetting linkata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133ata1.00: device reported invalid CHS sector 0ata1.00: device reported invalid CHS sector 0sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSEsd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]Descriptor sense data with sense descriptors (in hex):& & & & 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 & & & & 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense informationsd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 05 68 80 00 01 00 00end_request: I/O error, dev sda, sector sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSEsd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]Descriptor sense data with sense descriptors (in hex):& & & & 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 & & & & 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense informationsd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 05 6d 80 00 01 08 00end_request: I/O error, dev sda, sector ata1: EH completeata1.00: NCQ disabled due to excessive errorsata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozenata1.00: failed command: READ FPDMA QUEUEData1.00: cmd 60/08:08:10:f0:06/00:00:1a:00:00/40 tag 1 ncq 4096 in& & & & &res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)ata1.00: status: { DRDY }ata1: hard resetting linkata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeededata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered outata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)ata1.00: configured for UDMA/133ata1.00: device reported invalid CHS sector 0ata1: EH completereadahead-collector: startingudev: starting version 151lirc_dev: IR Remote Control driver registered, major 249 lis3lv02d: laptop model unknown, using default axes configurationlis3lv02d: 8 bits sensor foundenecir 00:0a: lirc_dev: driver enecir registered at minor = 0enecir: unknown ENE chip detected, assuming KB3926Denecir: driver support incompleteenecir: chip is 0x3926 - 0x00, 0xd2enecir: hardware features:enecir: learning and tx off, gpio40_learn off, fan_in offenecir: driver has been succesfully loadedinput: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11Registered led device: hp::hddprotectlis3lv02d driver loaded.ACPI: WMI: Mapper loadedmicrocode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07microcode: Microcode Update Driver: v2.00 &tigran@aivazian.fsnet.co.uk&, Peter OrubaiTCO_vendor_support: vendor-support=0iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)input: HP WMI hotkeys as /devices/virtual/input/input12i801_smbus f.3: PCI INT C -& GSI 18 (level, low) -& IRQ 18ACPI: I/O resource f.3 [0xf] conflicts with ACPI region SMBI [0xf]ACPI: If an ACPI driver is available for this device, you should use it instead of the native drivercfg80211: Calling CRDA to update world regulatory domainr8169 Gigabit Ethernet driver 2.3LK-NAPI loadedr:00.0: PCI INT A -& GSI 19 (level, low) -& IRQ 19r:00.0: setting latency timer to 64r:00.0: irq 30 for MSI/MSI-Xeth0: RTLd at 0xf7d8a000, 00:23:5a:42:01:e0, XID
IRQ 30Linux video capture interface: v2.00uvcvideo: Found UVC 1.00 device Webcam-101 (064e:c108)input: Webcam-101 as /devices/pci0:00:1d.7/usb2/2-5/2-5:1.0/input/input13usbcore: registered new interface driver uvcvideoUSB Video Class driver (v0.1.0)iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33.6-147.2.4.fc13.i686-kdsiwlagn: Copyright(c)
Intel Corporationiwlagn .0: PCI INT A -& GSI 18 (level, low) -& IRQ 18iwlagn .0: setting latency timer to 64iwlagn .0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54iwlagn .0: Tunable channels: 13 802.11bg, 24 802.11a channelsiwlagn .0: irq 31 for MSI/MSI-Xname_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435name_count maxed, losing inode data: dev=00:07, inode=8435cfg80211: World regulatory domain updated:& & (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)& & (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)& & (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)& & (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)& & (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)& & (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)HDA Intel b.0: power state changed by ACPI to D0HDA Intel b.0: power state changed by ACPI to D0HDA Intel b.0: PCI INT B -& GSI 22 (level, low) -& IRQ 22hda_intel: position_fix set to 1 for device 103c:306dHDA Intel b.0: irq 32 for MSI/MSI-XHDA Intel b.0: setting latency timer to 64ALSA sound/pci/hda/patch_sigmatel.c:5650: mute LED gpio 1 polarity 1ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)ALSA sound/pci/hda/hda_codec.c:4288:& & speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)ALSA sound/pci/hda/hda_codec.c:4292:& & hp_outs=1 (0xa/0x0/0x0/0x0/0x0)ALSA sound/pci/hda/hda_codec.c:4293:& & mono: mono_out=0x0ALSA sound/pci/hda/hda_codec.c:4304:& & inputs: mic=0xc, fmic=0xb, line=0x0, fline=0x0, cd=0x0, aux=0x0ALSA sound/pci/hda/patch_sigmatel.c:3000: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)input: HDA Intel Mic at Ext Front Jack as /devices/pci0:00:1b.0/sound/card0/input14input: HDA Intel HP Out at Ext Front Jack as /devices/pci0:00:1b.0/sound/card0/input15name_count maxed, losing inode data: dev=00:05, inode=8501name_count maxed, losing inode data: dev=00:05, inode=8360name_count maxed, losing inode data: dev=00:05, inode=8360name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8545phy0: Selected rate control algorithm 'iwl-agn-rs'name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8547name_count maxed, losing inode data: dev=00:07, inode=8420name_count maxed, losing inode data: dev=00:07, inode=8554name_count maxed, losing inode data: dev=00:07, inode=8554name_count maxed, losing inode data: dev=00:07, inode=8554name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8555name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8557name_count maxed, losing inode data: dev=00:07, inode=8556name_count maxed, losing inode data: dev=00:07, inode=8556cfg80211: Calling CRDA for country: CNcfg80211: Regulatory domain changed to country: CN& & (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)& & (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)& & (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)EXT4-fs (sda8): mounted filesystem with ordered data modeAdding 4128760k swap on /dev/mapper/vg_suzlaptop-lv_swap.& Priority:-1 extents:1 across:4128760k 现在装的是Fedora 13，内核已经升级到了 Linux 2.6.33.6-147.2.4.fc13.i686我的笔记本型号是 : HP CQ35-111tx
之前是一块富士320g硬盘，现在是一块日立的500G(型号 HTSA300)主板的bios就是贱，什么都没得设置，没有AHCI管或者开的选项。我试试降级bios试试先，然后再试试帖子上的NO NCQ，回头再汇报～
文件注释: dmesg文件
[53.31 KiB]
被下载 16 次
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
降级到 F13A BIOS还是不行（换硬盘前升级到了F14A）等下试试NO NCQ请各位多多帮忙，谢谢~
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
15:40帖子: 20
送出感谢: 0 次
接收感谢: 0 次
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
8:12帖子: 288
送出感谢: 0 次
帮LZ顶一下，我的也出现了这样的问题。不过我的系统是新的Fedora 15，一开始我以为是Fedora 15不稳定的缘故，上网找了不少地方发现应该不是Fedora 15自身的问题。我的dmesg的code跟LZ的也不太相同：代码:[& &34.; ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0[& &34.; ata1.00: BMDMA stat 0x25[& &34.; ata1.00: failed command: READ DMA EXT[& &34.; ata1.00: cmd 25/00:08:18:52:25/00:00:18:00:00/e0 tag 0 dma 4096 in[& &34.;& & & & & res 51/40:00:18:52:25/40:00:18:00:00/e0 Emask 0x9 (media error)[& &34.; ata1.00: status: { DRDY ERR }[& &34.; ata1.00: error: { UNC }[& &34.; ata1.00: configured for UDMA/133[& &34.; ata1: EH complete只是启动慢一些，不影响使用。故等待答案之。我做了两件比较“特殊”的事情：1、我折腾过Archlinux把ArchLinux装错了地方；2、我安装了Windows7。不知道这两个对这个问题的解决是不是有一些帮助。
_________________SLAX and Xorg(without any Window Managers) It's fun!
&文章标题 : Re: [疑惑]换了硬盘后，每次都要5分钟的检测时间发表于 :
21:55帖子: 58428地址: 长沙
liveCD都这样。就基本应该检查磁盘了。分区软件不规范，可导致问题。
_________________● 鸣学
显示帖子 : 全部帖子1天7天2周1个月3个月6个月1年&排序 作者发表时间文章标题 升序降序&
&[ 11 篇帖子 ]&
正在浏览此版面的用户：没有注册用户 和 1 位游客
您 不能 在这个版面发表主题您 不能 在这个版面回复主题您 不能 在这个版面编辑帖子您 不能 在这个版面删除帖子您 不能 在这个版面提交附件
选择一个版面
------------------
公告/注意事项
& &新闻和通知
& &校园社团支持
& &&}